cisco.nxos.nxos_hsrp_interfaces module – HSRP interfaces resource module
Note
This module is part of the cisco.nxos collection (version 11.2.0).
You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.nxos.
To use it in a playbook, specify: cisco.nxos.nxos_hsrp_interfaces.
New in cisco.nxos 10.1.0
Synopsis
- Resource module to configure HSRP on interfaces.
Note
This module has a corresponding action plugin.
Aliases: hsrp_interfaces
Parameters
Parameter | Comments |
|---|---|
config list / elements=dictionary | A dictionary of HSRP configuration options to add to interface |
|
bfd string |
Enable/Disable HSRP Bidirectional Forwarding Detection (BFD) on the interface. Deprecated, Use standby.bfd instead, the facts would always render bfd information as a part of standby configuration This option has been deprecated and will be removed in a release after 2028-06-01. Choices:
|
|
name string |
The name of the interface. |
|
standby dictionary |
Standby options generic, not idempotent when version 1 (HSRP) |
|
bfd boolean |
Enable HSRP BFD Choices:
|
|
delay dictionary |
HSRP initialization delay |
|
minimum integer |
Delay at least this long |
|
reload integer |
Delay after reload |
|
mac_refresh integer |
Refresh MAC cache on switch by periodically sending packet from virtual mac address |
|
use_bia dictionary |
HSRP uses interface’s burned in address (does not work with mac address) |
|
scope boolean |
Scope interface option (hsrp use-bia scope interface) Choices:
|
|
set boolean |
Set use-bia only Choices:
|
|
version integer |
HSRP version Choices:
|
|
standby_options list / elements=dictionary |
Group number and group options for standby (HSRP) |
|
authentication dictionary |
Authentication configuration |
|
key_chain string |
Set key chain |
|
key_string string |
Set key string |
|
password_text string |
Password text valid for plain text and and key-string |
|
follow string |
Groups to be followed |
|
group_name string |
Redundancy name string |
|
group_no integer |
Group number |
|
ip list / elements=dictionary |
Enable HSRP IPv4 and set the virtual IP address |
|
secondary boolean |
Make this IP address a secondary virtual IP address Choices:
|
|
virtual_ip string |
Virtual IP address |
|
mac_address string |
Virtual MAC address |
|
preempt dictionary |
Overthrow lower priority Active routers |
|
minimum integer |
Delay at least this long |
|
reload integer |
Delay after reload |
|
sync integer |
Wait for IP redundancy clients |
|
priority dictionary |
Priority level |
|
level integer |
Priority level value Default: |
|
lower integer |
Set lower threshold value (forwarding-threshold) |
|
upper integer |
Set upper threshold value (forwarding-threshold) |
|
timer dictionary |
Overthrow lower priority Active routers |
|
hello_interval integer |
Hello interval in seconds |
|
hold_time integer |
Hold time in seconds |
|
msec boolean |
Specify hello interval in milliseconds Choices:
|
|
track list / elements=dictionary |
Priority tracking |
|
decrement integer |
Priority decrement |
|
object_no integer |
Track object number |
running_config string | This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config | section ‘^interface’. The state parsed reads the configuration from |
state string | The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from Choices:
|
Notes
Note
- Tested against NX-OS 10.4(2) Nexus 9000v.
- Feature bfd and hsrp, should be enabled for this module.
- Unsupported for Cisco MDS
Examples
# Using merged
# Before state:
# -------------
#
# switch# show running-config | section interface
# interface Vlan1
# interface Vlan10
# interface Vlan14
# bandwidth 99999
# interface Vlan1000
# interface Ethernet1/1
# interface Ethernet1/2
# interface Ethernet1/3
# interface Ethernet1/4
# interface Ethernet1/5
# interface Ethernet1/6
# interface Ethernet1/7
- name: Merge provided configuration with device configuration
cisco.nxos.nxos_hsrp_interfaces:
config:
- name: Ethernet1/1
standby:
bfd: true
mac_refresh: 400
version: 2
standby_options:
- authentication:
key_string: SECUREKEY10
group_name: VLAN10-GROUP
group_no: 10
ip:
- secondary: true
virtual_ip: 10.10.10.2
mac_address: 00CC.10DD.10EE
state: merged
# Task Output
# -----------
#
# before:
# - name: Vlan1
# - name: Vlan10
# - name: Vlan14
# - name: Vlan1000
# - name: Ethernet1/1
# standby:
# bfd: true
# - name: Ethernet1/2
# - name: Ethernet1/3
# - name: Ethernet1/4
# - name: Ethernet1/5
# - name: Ethernet1/6
# - name: Ethernet1/7
# commands:
# - interface Ethernet1/1
# - hsrp version 2
# - hsrp mac-refresh 400
# - hsrp 10
# - mac-address 00CC.10DD.10EE
# - name VLAN10-GROUP
# - authentication md5 key-string SECUREKEY10
# - ip 10.10.10.2 secondary
# - interface Ethernet1/2
# - hsrp bfd
# - hsrp version 2
# - hsrp mac-refresh 400
# - hsrp 20
# - mac-address 00CC.10DD.10EF
# - name VLAN20-GROUP
# - authentication md5 key-chain SECUREKEY20
# - ip 10.10.10.3 secondary
# after:
# - name: Vlan1
# - name: Vlan10
# - name: Vlan14
# - name: Vlan1000
# - name: Ethernet1/1
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_string: SECUREKEY10
# group_name: VLAN10-GROUP
# group_no: 10
# ip:
# - secondary: true
# virtual_ip: 10.10.10.2
# mac_address: 00CC.10DD.10EE
# - name: Ethernet1/2
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_chain: SECUREKEY20
# group_name: VLAN20-GROUP
# group_no: 20
# ip:
# - secondary: true
# virtual_ip: 10.10.10.3
# mac_address: 00CC.10DD.10EF
# - name: Ethernet1/3
# - name: Ethernet1/4
# - name: Ethernet1/5
# - name: Ethernet1/6
# - name: Ethernet1/7
# After state:
# ------------
#
# switch# show running-config | section interface
# interface Vlan1
# interface Vlan10
# interface Vlan14
# bandwidth 99999
# interface Vlan1000
# interface Ethernet1/1
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 10
# authentication md5 key-string SECUREKEY10
# name VLAN10-GROUP
# mac-address 00CC.10DD.10EE
# ip 10.10.10.2 secondary
# interface Ethernet1/2
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 20
# authentication md5 key-chain SECUREKEY20
# name VLAN20-GROUP
# mac-address 00CC.10DD.10EF
# ip 10.10.10.3 secondary
# interface Ethernet1/3
# interface Ethernet1/4
# interface Ethernet1/5
# interface Ethernet1/6
# interface Ethernet1/7
# Using replaced
# Before state:
# -------------
#
# switch# show running-config | section interface
# interface Vlan1
# interface Vlan10
# interface Vlan14
# bandwidth 99999
# interface Vlan1000
# interface Ethernet1/1
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 10
# authentication md5 key-string SECUREKEY10
# name VLAN10-GROUP
# mac-address 00CC.10DD.10EE
# ip 10.10.10.2 secondary
# interface Ethernet1/2
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 20
# authentication md5 key-chain SECUREKEY20
# name VLAN20-GROUP
# mac-address 00CC.10DD.10EF
# ip 10.10.10.3 secondary
# interface Ethernet1/3
# interface Ethernet1/4
# interface Ethernet1/5
# interface Ethernet1/6
# interface Ethernet1/7
- name: Replaces device configuration of listed interfaces with provided configuration
cisco.nxos.nxos_hsrp_interfaces:
config:
- name: Ethernet1/1
standby:
bfd: true
mac_refresh: 400
version: 2
standby_options:
- authentication:
key_string: SECUREKEY10
group_name: VLAN11-GROUP
group_no: 11
mac_address: 00CC.10DD.10EE
- name: Ethernet1/2
standby:
bfd: true
mac_refresh: 400
version: 2
standby_options:
- authentication:
key_chain: SECUREKEY20
group_name: VLAN20-GROUP
group_no: 20
mac_address: 00CC.10DD.10EF
state: replaced
# Task Output
# -----------
#
# before:
# - name: Vlan1
# - name: Vlan10
# - name: Vlan14
# - name: Vlan1000
# - name: Ethernet1/1
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_string: SECUREKEY10
# group_name: VLAN10-GROUP
# group_no: 10
# ip:
# - secondary: true
# virtual_ip: 10.10.10.2
# mac_address: 00CC.10DD.10EE
# - name: Ethernet1/2
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_chain: SECUREKEY20
# group_name: VLAN20-GROUP
# group_no: 20
# ip:
# - secondary: true
# virtual_ip: 10.10.10.3
# mac_address: 00CC.10DD.10EF
# - name: Ethernet1/3
# - name: Ethernet1/4
# - name: Ethernet1/5
# - name: Ethernet1/6
# - name: Ethernet1/7
# commands:
# - interface Ethernet1/1
# - hsrp 11
# - mac-address 00CC.10DD.10EE
# - name VLAN11-GROUP
# - authentication md5 key-string SECUREKEY10
# - no hsrp 10
# - interface Ethernet1/2
# - hsrp 20
# - no ip 10.10.10.3 secondary
# after:
# - name: Vlan1
# - name: Vlan10
# - name: Vlan14
# - name: Vlan1000
# - name: Ethernet1/1
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_string: SECUREKEY10
# group_name: VLAN11-GROUP
# group_no: 11
# mac_address: 00CC.10DD.10EE
# - name: Ethernet1/2
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_chain: SECUREKEY20
# group_name: VLAN20-GROUP
# group_no: 20
# mac_address: 00CC.10DD.10EF
# - name: Ethernet1/3
# - name: Ethernet1/4
# - name: Ethernet1/5
# - name: Ethernet1/6
# - name: Ethernet1/7
# After state:
# ------------
#
# switch# show running-config | section interface
# interface Vlan1
# interface Vlan10
# interface Vlan14
# bandwidth 99999
# interface Vlan1000
# interface Ethernet1/1
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 11
# authentication md5 key-string SECUREKEY10
# name VLAN11-GROUP
# mac-address 00CC.10DD.10EE
# interface Ethernet1/2
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 20
# authentication md5 key-chain SECUREKEY20
# name VLAN20-GROUP
# mac-address 00CC.10DD.10EF
# interface Ethernet1/3
# interface Ethernet1/4
# interface Ethernet1/5
# interface Ethernet1/6
# interface Ethernet1/7
# Using overridden
# Before state:
# -------------
#
# switch# show running-config | section interface
# interface Vlan1
# interface Vlan10
# interface Vlan14
# bandwidth 99999
# interface Vlan1000
# interface Ethernet1/1
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 10
# authentication md5 key-string SECUREKEY10
# name VLAN10-GROUP
# mac-address 00CC.10DD.10EE
# ip 10.10.10.2 secondary
# interface Ethernet1/2
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 20
# authentication md5 key-chain SECUREKEY20
# name VLAN20-GROUP
# mac-address 00CC.10DD.10EF
# ip 10.10.10.3 secondary
- name: Override device configuration of all interfaces with provided configuration
cisco.nxos.nxos_hsrp_interfaces:
config:
- name: Ethernet1/1
standby:
bfd: true
mac_refresh: 400
version: 2
standby_options:
- authentication:
key_string: SECUREKEY10
group_name: VLAN11-GROUP
group_no: 11
mac_address: 00CC.10DD.10EE
- name: Ethernet1/2
standby:
bfd: true
mac_refresh: 400
version: 2
standby_options:
- authentication:
key_chain: SECUREKEY20
group_name: VLAN20-GROUP
group_no: 20
mac_address: 00CC.10DD.10EF
state: overridden
# Task Output
# -----------
#
# before:
# - name: Vlan1
# - name: Vlan10
# - name: Vlan14
# - name: Vlan1000
# - name: Ethernet1/1
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_string: SECUREKEY10
# group_name: VLAN10-GROUP
# group_no: 10
# ip:
# - secondary: true
# virtual_ip: 10.10.10.2
# mac_address: 00CC.10DD.10EE
# - name: Ethernet1/2
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_chain: SECUREKEY20
# group_name: VLAN20-GROUP
# group_no: 20
# ip:
# - secondary: true
# virtual_ip: 10.10.10.3
# mac_address: 00CC.10DD.10EF
# - name: Ethernet1/3
# - name: Ethernet1/4
# - name: Ethernet1/5
# - name: Ethernet1/6
# - name: Ethernet1/7
# commands:
# - interface Ethernet1/1
# - hsrp 11
# - mac-address 00CC.10DD.10EE
# - name VLAN11-GROUP
# - authentication md5 key-string SECUREKEY10
# - no hsrp 10
# - interface Ethernet1/2
# - hsrp 20
# - no ip 10.10.10.3 secondary
# after:
# - name: Vlan1
# - name: Vlan10
# - name: Vlan14
# - name: Vlan1000
# - name: Ethernet1/1
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_string: SECUREKEY10
# group_name: VLAN11-GROUP
# group_no: 11
# mac_address: 00CC.10DD.10EE
# - name: Ethernet1/2
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_chain: SECUREKEY20
# group_name: VLAN20-GROUP
# group_no: 20
# mac_address: 00CC.10DD.10EF
# - name: Ethernet1/3
# - name: Ethernet1/4
# - name: Ethernet1/5
# - name: Ethernet1/6
# - name: Ethernet1/7
# After state:
# ------------
#
# switch# show running-config | section interface
# interface Vlan1
# interface Vlan10
# interface Vlan14
# bandwidth 99999
# interface Vlan1000
# interface Ethernet1/1
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 11
# authentication md5 key-string SECUREKEY10
# name VLAN11-GROUP
# mac-address 00CC.10DD.10EE
# interface Ethernet1/2
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 20
# authentication md5 key-chain SECUREKEY20
# name VLAN20-GROUP
# mac-address 00CC.10DD.10EF
# interface Ethernet1/3
# interface Ethernet1/4
# interface Ethernet1/5
# interface Ethernet1/6
# interface Ethernet1/7
# Using deleted
# Before state:
# -------------
#
# switch# show running-config | section interface
# interface Vlan1
# interface Vlan10
# interface Vlan14
# bandwidth 99999
# interface Vlan1000
# interface Ethernet1/1
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 10
# authentication md5 key-string SECUREKEY10
# name VLAN10-GROUP
# mac-address 00CC.10DD.10EE
# ip 10.10.10.2 secondary
# interface Ethernet1/2
# no switchport
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 20
# authentication md5 key-chain SECUREKEY20
# name VLAN20-GROUP
# mac-address 00CC.10DD.10EF
# ip 10.10.10.3 secondary
# interface Ethernet1/3
# interface Ethernet1/4
# interface Ethernet1/5
# interface Ethernet1/6
# interface Ethernet1/7
- name: Delete or return interface parameters to default settings
cisco.nxos.nxos_hsrp_interfaces:
config:
- name: Ethernet1/1
standby:
bfd: true
mac_refresh: 400
version: 2
standby_options:
- authentication:
key_string: SECUREKEY10
group_name: VLAN11-GROUP
group_no: 11
mac_address: 00CC.10DD.10EE
- name: Ethernet1/2
standby:
bfd: true
mac_refresh: 400
version: 2
standby_options:
- authentication:
key_chain: SECUREKEY20
group_name: VLAN20-GROUP
group_no: 20
mac_address: 00CC.10DD.10EF
state: deleted
# Task Output
# -----------
#
# before:
# - name: Vlan1
# - name: Vlan10
# - name: Vlan14
# - name: Vlan1000
# - name: Ethernet1/1
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_string: SECUREKEY10
# group_name: VLAN10-GROUP
# group_no: 10
# ip:
# - secondary: true
# virtual_ip: 10.10.10.2
# mac_address: 00CC.10DD.10EE
# - name: Ethernet1/2
# standby:
# bfd: true
# mac_refresh: 400
# version: 2
# standby_options:
# - authentication:
# key_chain: SECUREKEY20
# group_name: VLAN20-GROUP
# group_no: 20
# ip:
# - secondary: true
# virtual_ip: 10.10.10.3
# mac_address: 00CC.10DD.10EF
# - name: Ethernet1/3
# - name: Ethernet1/4
# - name: Ethernet1/5
# - name: Ethernet1/6
# - name: Ethernet1/7
# commands:
# - interface Ethernet1/1
# - no hsrp bfd
# - no hsrp version 2
# - no hsrp mac-refresh 400
# - no hsrp 10
# - interface Ethernet1/2
# - no hsrp bfd
# - no hsrp version 2
# - no hsrp mac-refresh 400
# - no hsrp 20
# after:
# - name: Vlan1
# - name: Vlan10
# - name: Vlan14
# - name: Vlan1000
# - name: Ethernet1/1
# - name: Ethernet1/2
# - name: Ethernet1/3
# - name: Ethernet1/4
# - name: Ethernet1/5
# - name: Ethernet1/6
# After state:
# ------------
#
# switch# show running-config | section interface
# interface Vlan1
# interface Vlan10
# interface Vlan14
# bandwidth 99999
# interface Vlan1000
# interface Ethernet1/1
# no switchport
# interface Ethernet1/2
# no switchport
# interface Ethernet1/3
# interface Ethernet1/4
# interface Ethernet1/5
# interface Ethernet1/6
# interface Ethernet1/7
# Using rendered
- name: Use rendered state to convert task input to device specific commands
cisco.nxos.nxos_hsrp_interfaces:
config:
- name: Ethernet1/1
description: outbound-intf
mode: layer3
speed: 100
- name: Ethernet1/2
mode: layer2
enabled: true
duplex: full
state: rendered
# Task Output
# -----------
#
# rendered:
# - interface Vlan1
# - hsrp version 2
# - hsrp 10
# - timers msec 250 255
# - authentication md5 key-chain test
# - interface Vlan10
# - hsrp bfd
# - hsrp version 2
# - hsrp mac-refresh 400
# - hsrp 10
# - mac-address 00CC.10DD.10EE
# - name VLAN10-GROUP
# - preempt delay minimum 15 reload 120 sync 10
# - authentication md5 key-string SECUREKEY10
# - ip 10.10.10.2 secondary
# - interface Vlan14
# - hsrp bfd
# - hsrp version 2
# - hsrp delay 22 123
# - hsrp mac-refresh 300
# - hsrp 14
# - follow VLAN14-GROUP
# - mac-address 00AA.14BB.14CC
# - ip 192.168.14.1 secondary
# - ip 192.168.14.2 secondary
# - hsrp 15
# - mac-address 00BB.14CC.15DD
# - preempt delay minimum 10 reload 100 sync 5
# - priority 22 forwarding-threshold lower 12 upper 22
# - timers msec 456 33
# - authentication md5 key-string SECUREKEY14
# - interface Vlan1000
# - hsrp 10
# - mac-address 0423.4567.89AB
# - name testhsr
# - preempt delay minimum 33 reload 23 sync 22
# - priority 22 forwarding-threshold lower 12 upper 22
# - timers msec 456 33
# - authentication md5 key-string testmesecurte
# - ip 10.15.8.1 secondary
# Using parsed
# parsed.cfg
# ------------
#
# interface Vlan1
# hsrp version 2
# hsrp 10
# authentication md5 key-chain test
# timers msec 250 255
# interface Vlan10
# hsrp bfd
# hsrp version 2
# hsrp mac-refresh 400
# hsrp 10
# authentication md5 key-string SECUREKEY10
# name VLAN10-GROUP
# mac-address 00CC.10DD.10EE
# preempt delay minimum 15 reload 120 sync 10
# ip 10.10.10.2 secondary
# interface Vlan14
# bandwidth 99999
# hsrp bfd
# hsrp version 2
# hsrp delay minimum 22 reload 123
# hsrp mac-refresh 300
# hsrp 14
# follow VLAN14-GROUP
# mac-address 00AA.14BB.14CC
# ip 192.168.14.1 secondary
# ip 192.168.14.2 secondary
# hsrp 15
# authentication md5 key-string SECUREKEY14
# mac-address 00BB.14CC.15DD
# preempt delay minimum 10 reload 100 sync 5
# priority 22 forwarding-threshold lower 12 upper 22
# timers msec 456 33
# interface Vlan1000
# hsrp 10
# authentication md5 key-string testmesecurte
# name testhsr
# mac-address 0423.4567.89AB
# preempt delay minimum 33 reload 23 sync 22
# priority 22 forwarding-threshold lower 12 upper 22
# timers msec 456 33
# ip 10.15.8.1 secondary
- name: Use parsed state to convert externally supplied config to structured format
cisco.nxos.nxos_hsrp_interfaces:
running_config: "{{ lookup('file', 'parsed.cfg') }}"
state: parsed
# Task output
# -----------
#
# {"parsed": [
# {
# "name": "Vlan1",
# "standby": {
# "version": 2
# },
# "standby_options": [
# {
# "authentication": {
# "key_chain": "test"
# },
# "group_no": 10,
# "timer": {
# "hello_interval": 250,
# "hold_time": 255,
# "msec": true
# }
# }
# ]
# },
# {
# "name": "Vlan10",
# "standby": {
# "bfd": true,
# "mac_refresh": 400,
# "version": 2
# },
# "standby_options": [
# {
# "authentication": {
# "key_string": "SECUREKEY10"
# },
# "group_name": "VLAN10-GROUP",
# "group_no": 10,
# "ip": [
# {
# "secondary": true,
# "virtual_ip": "10.10.10.2"
# }
# ],
# "mac_address": "00CC.10DD.10EE",
# "preempt": {
# "minimum": 15,
# "reload": 120,
# "sync": 10
# }
# }
# ]
# },
# {
# "name": "Vlan14",
# "standby": {
# "bfd": true,
# "delay": {
# "minimum": 22,
# "reload": 123
# },
# "mac_refresh": 300,
# "version": 2
# },
# "standby_options": [
# {
# "follow": "VLAN14-GROUP",
# "group_no": 14,
# "ip": [
# {
# "secondary": true,
# "virtual_ip": "192.168.14.1"
# },
# {
# "secondary": true,
# "virtual_ip": "192.168.14.2"
# }
# ],
# "mac_address": "00AA.14BB.14CC"
# },
# {
# "authentication": {
# "key_string": "SECUREKEY14"
# },
# "group_no": 15,
# "mac_address": "00BB.14CC.15DD",
# "preempt": {
# "minimum": 10,
# "reload": 100,
# "sync": 5
# },
# "priority": {
# "level": 22,
# "lower": 12,
# "upper": 22
# },
# "timer": {
# "hello_interval": 456,
# "hold_time": 33,
# "msec": true
# }
# }
# ]
# },
# {
# "name": "Vlan1000",
# "standby_options": [
# {
# "authentication": {
# "key_string": "testmesecurte"
# },
# "group_name": "testhsr",
# "group_no": 10,
# "ip": [
# {
# "secondary": true,
# "virtual_ip": "10.15.8.1"
# }
# ],
# "mac_address": "0423.4567.89AB",
# "preempt": {
# "minimum": 33,
# "reload": 23,
# "sync": 22
# },
# "priority": {
# "level": 22,
# "lower": 12,
# "upper": 22
# },
# "timer": {
# "hello_interval": 456,
# "hold_time": 33,
# "msec": true
# }
# }
# ]}
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key | Description |
|---|---|
after dictionary | The resulting configuration after module execution. Returned: when changed Sample: |
before dictionary | The configuration prior to the module execution. Returned: when state is Sample: |
commands list / elements=string | The set of commands pushed to the remote device. Returned: when state is Sample: |
gathered list / elements=string | Facts about the network resource gathered from the remote device as structured data. Returned: when state is Sample: |
parsed list / elements=string | The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is Sample: |
rendered list / elements=string | The provided configuration in the task rendered in device-native format (offline). Returned: when state is Sample: |
Collection links
© 2012–2018 Michael DeHaan
© 2018–2025 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/projects/ansible/latest/collections/cisco/nxos/nxos_hsrp_interfaces_module.html
