netapp.ontap.na_ontap_volume_autosize module – NetApp ONTAP manage volume autosize

cert_filepath

string

added in netapp.ontap 20.6.0

path to SSL client cert file (.pem).

not supported with python 2.6.

feature_flags

dictionary

added in netapp.ontap 20.5.0

Enable or disable a new feature.

This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.

Supported keys and values are subject to change without notice. Unknown keys are ignored.

force_ontap_version

string

added in netapp.ontap 21.23.0

Override the cluster ONTAP version when using REST.

The behavior is undefined if the version does not match the target cluster.

This is provided as a work-around when the cluster version cannot be read because of permission issues. See https://github.com/ansible-collections/netapp.ontap/wiki/Known-issues.

This should be in the form 9.10 or 9.10.1 with each element being an integer number.

When use_rest is set to auto, this may force a switch to ZAPI based on the version and platform capabilities.

Ignored with ZAPI.

grow_threshold_percent

integer

Specifies the percentage of the flexible volume’s capacity at which autogrow is initiated.

The default grow threshold varies from 85% to 98%, depending on the volume size.

It is an error for the grow threshold to be less than or equal to the shrink threshold.

Range between 0 and 100

hostname

string / required

The hostname or IP address of the ONTAP instance.

http_port

integer

Override the default port (80 or 443) with this port

https

boolean

Enable and disable https.

Ignored when using REST as only https is supported.

Ignored when using SSL certificate authentication as it requires SSL.

Choices:

• false ← (default)
• true

increment_size

string

Specify the flexible volume’s increment size using the following format < number > [k|m|g|t]

The amount is the absolute size to set.

The trailing ‘k’, ‘m’, ‘g’, and ‘t’ indicates the desired units, namely ‘kilobytes’, ‘megabytes’, ‘gigabytes’, and ‘terabytes’ (respectively).

Not supported with REST.

key_filepath

string

added in netapp.ontap 20.6.0

path to SSL client key file.

lambda_config

dictionary

added in netapp.ontap 23.4.0

Configuration parameters for AWS Lambda proxy functionality.

These option and suboptions are only supported with REST.

aws_profile

string

The name of the AWS profile to use for authentication.

aws_region

string / required

The name of the AWS region.

function_name

string / required

The name of the AWS Lambda function to invoke.

maximum_size

string

Specify the flexible volume’s maximum allowed size using the following format < number > [k|m|g|t]

The amount is the absolute size to set.

The trailing ‘k’, ‘m’, ‘g’, and ‘t’ indicates the desired units, namely ‘kilobytes’, ‘megabytes’, ‘gigabytes’, and ‘terabytes’ (respectively).

The default value is 20% greater than the volume size at the time autosize was enabled.

It is an error for the maximum volume size to be less than the current volume size.

It is also an error for the maximum size to be less than or equal to the minimum size.

minimum_size

string

Specify the flexible volume’s minimum allowed size using the following format < number > [k|m|g|t] The amount is the absolute size to set.

The trailing ‘k’, ‘m’, ‘g’, and ‘t’ indicates the desired units, namely ‘kilobytes’, ‘megabytes’, ‘gigabytes’, and ‘terabytes’ (respectively).

The default value is the size of the volume at the time the ‘grow_shrink’ mode was enabled.

It is an error for the minimum size to be greater than or equal to the maximum size.

mode

string

Specify the flexible volume’s autosize mode of operation.

Choices:

• "grow"
• "grow_shrink"
• "off"

ontapi

integer

The ontap api version to use

password

aliases: pass

string

Password for the specified user.

reset

boolean

Sets the values of maximum_size, increment_size, minimum_size, grow_threshold_percent, shrink_threshold_percent and mode to their defaults

If reset paramater is present system will always perform reset action, so idempotency is not supported.

Not supported with REST.

Choices:

• false
• true

shrink_threshold_percent

integer

Specifies the percentage of the flexible volume’s capacity at which autoshrink is initiated.

The default shrink theshold is 50%. It is an error for the shrink threshold to be greater than or equal to the grow threshold.

Range between 0 and 100

use_lambda

boolean

added in netapp.ontap 23.2.0

Specifies if AWS Lambda proxy functionality should be used to connect to the ONTAP system.

Supported only with REST.

Choices:

• false ← (default)
• true

use_rest

string

Whether to use REST or ZAPI.

always -- will always use the REST API if the module supports REST. A warning is issued if the module does not support REST. An error is issued if a module option is not supported in REST.

never -- will always use ZAPI if the module supports ZAPI. An error may be issued if a REST option is not supported in ZAPI.

auto -- will try to use the REST API if the module supports REST and modules options are supported. Reverts to ZAPI otherwise.

Default: "always"

username

aliases: user

string

This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.

For more information, please read the documentation https://docs.netapp.com/us-en/ontap/authentication/create-svm-user-accounts-task.html.

Two authentication methods are supported

1. Basic authentication, using username and password.
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.

To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

validate_certs

boolean

If set to no, the SSL certificates will not be validated.

This should only set to False used on personally controlled sites using self-signed certificates.

Choices:

• false
• true ← (default)

volume

string / required

The name of the flexible volume for which we want to set autosize.

vserver

string / required

Name of the vserver to use.