Spec-Zone.ru › OpenJavaFX 24

Class ScaleTransition

java.lang.Object
javafx.animation.Animation
javafx.animation.Transition
javafx.animation.ScaleTransition
public final class ScaleTransition extends Transition
This Transition creates a scale animation that spans its duration. This is done by updating the scaleX, scaleY and scaleZ variables of the node at regular intervals.

It starts from the (fromX, fromY, fromZ) value if provided else uses the node's (scaleX, scaleY, scaleZ) value.

It stops at the (toX, toY, toZ) value if provided else it will use start value plus (byX, byY, byZ) value.

The (toX, toY, toZ) value takes precedence if both ( toX, toY, toZ) and (byX, byY, byZ) values are specified.

Code Segment Example: 

 
 import javafx.scene.shape.*;
 import javafx.animation.*;

 ...

     Rectangle rect = new Rectangle (100, 40, 100, 100);
     rect.setArcHeight(50);
     rect.setArcWidth(50);
     rect.setFill(Color.VIOLET);

     ScaleTransition st = new ScaleTransition(Duration.millis(2000), rect);
     st.setByX(1.5f);
     st.setByY(1.5f);
     st.setCycleCount(4f);
     st.setAutoReverse(true);

     st.play();

 ...
Since:
JavaFX 2.0
See Also:
  • Transition
  • Animation

Nested Class Summary

Nested classes/interfaces declared in class javafx.animation.Animation

Animation.Status

Property Summary

Type Property Description
final DoubleProperty byX
Specifies the incremented stop X scale value, from the start, of this ScaleTransition.
final DoubleProperty byY
Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.
final DoubleProperty byZ
Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.
final ObjectProperty<Duration> duration
The duration of this ScaleTransition.
final DoubleProperty fromX
Specifies the start X scale value of this ScaleTransition.
final DoubleProperty fromY
Specifies the start Y scale value of this ScaleTransition.
final DoubleProperty fromZ
Specifies the start Z scale value of this ScaleTransition.
final ObjectProperty<Node> node
The target node of this ScaleTransition.
final DoubleProperty toX
Specifies the stop X scale value of this ScaleTransition.
final DoubleProperty toY
The stop Y scale value of this ScaleTransition.
final DoubleProperty toZ
The stop Z scale value of this ScaleTransition.

Properties declared in class javafx.animation.Transition

interpolator

Properties declared in class javafx.animation.Animation

autoReverse, currentRate, currentTime, cycleCount, cycleDuration, delay, onFinished, rate, status, totalDuration

Field Summary

Fields declared in class javafx.animation.Animation

INDEFINITE

Constructor Summary

Constructor Description
ScaleTransition()
The constructor of ScaleTransition
ScaleTransition(Duration duration)
The constructor of ScaleTransition
ScaleTransition(Duration duration, Node node)
The constructor of ScaleTransition

Method Summary

Modifier and Type Method Description
final DoubleProperty byXProperty()
Specifies the incremented stop X scale value, from the start, of this ScaleTransition.
final DoubleProperty byYProperty()
Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.
final DoubleProperty byZProperty()
Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.
final ObjectProperty<Duration> durationProperty()
The duration of this ScaleTransition.
final DoubleProperty fromXProperty()
Specifies the start X scale value of this ScaleTransition.
final DoubleProperty fromYProperty()
Specifies the start Y scale value of this ScaleTransition.
final DoubleProperty fromZProperty()
Specifies the start Z scale value of this ScaleTransition.
final double getByX()
Gets the value of the byX property.
final double getByY()
Gets the value of the byY property.
final double getByZ()
Gets the value of the byZ property.
final Duration getDuration()
Gets the value of the duration property.
final double getFromX()
Gets the value of the fromX property.
final double getFromY()
Gets the value of the fromY property.
final double getFromZ()
Gets the value of the fromZ property.
final Node getNode()
Gets the value of the node property.
final double getToX()
Gets the value of the toX property.
final double getToY()
Gets the value of the toY property.
final double getToZ()
Gets the value of the toZ property.
void interpolate(double frac)
The method interpolate() has to be provided by implementations of Transition.
final ObjectProperty<Node> nodeProperty()
The target node of this ScaleTransition.
final void setByX(double value)
Sets the value of the byX property.
final void setByY(double value)
Sets the value of the byY property.
final void setByZ(double value)
Sets the value of the byZ property.
final void setDuration(Duration value)
Sets the value of the duration property.
final void setFromX(double value)
Sets the value of the fromX property.
final void setFromY(double value)
Sets the value of the fromY property.
final void setFromZ(double value)
Sets the value of the fromZ property.
final void setNode(Node value)
Sets the value of the node property.
final void setToX(double value)
Sets the value of the toX property.
final void setToY(double value)
Sets the value of the toY property.
final void setToZ(double value)
Sets the value of the toZ property.
final DoubleProperty toXProperty()
Specifies the stop X scale value of this ScaleTransition.
final DoubleProperty toYProperty()
The stop Y scale value of this ScaleTransition.
final DoubleProperty toZProperty()
The stop Z scale value of this ScaleTransition.

Methods declared in class javafx.animation.Transition

getCachedInterpolator, getInterpolator, getParentTargetNode, interpolatorProperty, setInterpolator

Methods declared in class javafx.animation.Animation

autoReverseProperty, currentRateProperty, currentTimeProperty, cycleCountProperty, cycleDurationProperty, delayProperty, getCuePoints, getCurrentRate, getCurrentTime, getCycleCount, getCycleDuration, getDelay, getOnFinished, getRate, getStatus, getTargetFramerate, getTotalDuration, isAutoReverse, jumpTo, jumpTo, onFinishedProperty, pause, play, playFrom, playFrom, playFromStart, rateProperty, setAutoReverse, setCycleCount, setCycleDuration, setDelay, setOnFinished, setRate, setStatus, statusProperty, stop, totalDurationProperty

Methods declared in class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Property Details

node

public final ObjectProperty<Node> nodeProperty
The target node of this ScaleTransition.

It is not possible to change the target node of a running ScaleTransition. If the value of node is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

See Also:
  • getNode()
  • setNode(Node)
  • nodeProperty()

duration

public final ObjectProperty<Duration> durationProperty
The duration of this ScaleTransition.

It is not possible to change the duration of a running ScaleTransition. If the value of duration is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.

Default value:
400ms
See Also:
  • getDuration()
  • setDuration(Duration)
  • durationProperty()

fromX

public final DoubleProperty fromXProperty
Specifies the start X scale value of this ScaleTransition.

It is not possible to change fromX of a running ScaleTransition. If the value of fromX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
See Also:
  • getFromX()
  • setFromX(double)
  • fromXProperty()

fromY

public final DoubleProperty fromYProperty
Specifies the start Y scale value of this ScaleTransition.

It is not possible to change fromY of a running ScaleTransition. If the value of fromY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
See Also:
  • getFromY()
  • setFromY(double)
  • fromYProperty()

fromZ

public final DoubleProperty fromZProperty
Specifies the start Z scale value of this ScaleTransition.

It is not possible to change fromZ of a running ScaleTransition. If the value of fromZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
See Also:
  • getFromZ()
  • setFromZ(double)
  • fromZProperty()

toX

public final DoubleProperty toXProperty
Specifies the stop X scale value of this ScaleTransition.

It is not possible to change toX of a running ScaleTransition. If the value of toX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
See Also:
  • getToX()
  • setToX(double)
  • toXProperty()

toY

public final DoubleProperty toYProperty
The stop Y scale value of this ScaleTransition.

It is not possible to change toY of a running ScaleTransition. If the value of toY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
See Also:
  • getToY()
  • setToY(double)
  • toYProperty()

toZ

public final DoubleProperty toZProperty
The stop Z scale value of this ScaleTransition.

It is not possible to change toZ of a running ScaleTransition. If the value of toZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
See Also:
  • getToZ()
  • setToZ(double)
  • toZProperty()

byX

public final DoubleProperty byXProperty
Specifies the incremented stop X scale value, from the start, of this ScaleTransition.

It is not possible to change byX of a running ScaleTransition. If the value of byX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

See Also:
  • getByX()
  • setByX(double)
  • byXProperty()

byY

public final DoubleProperty byYProperty
Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.

It is not possible to change byY of a running ScaleTransition. If the value of byY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

See Also:
  • getByY()
  • setByY(double)
  • byYProperty()

byZ

public final DoubleProperty byZProperty
Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.

It is not possible to change byZ of a running ScaleTransition. If the value of byZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

See Also:
  • getByZ()
  • setByZ(double)
  • byZProperty()

Constructor Details

ScaleTransition

public ScaleTransition(Duration duration, Node node)
The constructor of ScaleTransition
Parameters:
duration - The duration of the ScaleTransition
node - The node which will be scaled

ScaleTransition

public ScaleTransition(Duration duration)
The constructor of ScaleTransition
Parameters:
duration - The duration of the ScaleTransition

ScaleTransition

public ScaleTransition()
The constructor of ScaleTransition

Method Details

setNode

public final void setNode(Node value)
Sets the value of the node property.
Property description:
The target node of this ScaleTransition.

It is not possible to change the target node of a running ScaleTransition. If the value of node is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Parameters:
value - the value for the node property
See Also:
  • getNode()
  • nodeProperty()

getNode

public final Node getNode()
Gets the value of the node property.
Property description:
The target node of this ScaleTransition.

It is not possible to change the target node of a running ScaleTransition. If the value of node is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Returns:
the value of the node property
See Also:
  • setNode(Node)
  • nodeProperty()

nodeProperty

public final ObjectProperty<Node> nodeProperty()
The target node of this ScaleTransition.

It is not possible to change the target node of a running ScaleTransition. If the value of node is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Returns:
the node property
See Also:
  • getNode()
  • setNode(Node)

setDuration

public final void setDuration(Duration value)
Sets the value of the duration property.
Property description:
The duration of this ScaleTransition.

It is not possible to change the duration of a running ScaleTransition. If the value of duration is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.

Default value:
400ms
Parameters:
value - the value for the duration property
See Also:
  • getDuration()
  • durationProperty()

getDuration

public final Duration getDuration()
Gets the value of the duration property.
Property description:
The duration of this ScaleTransition.

It is not possible to change the duration of a running ScaleTransition. If the value of duration is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.

Default value:
400ms
Returns:
the value of the duration property
See Also:
  • setDuration(Duration)
  • durationProperty()

durationProperty

public final ObjectProperty<Duration> durationProperty()
The duration of this ScaleTransition.

It is not possible to change the duration of a running ScaleTransition. If the value of duration is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Note: While the unit of duration is a millisecond, the granularity depends on the underlying operating system and will in general be larger. For example animations on desktop systems usually run with a maximum of 60fps which gives a granularity of ~17 ms. Setting duration to value lower than Duration.ZERO will result in IllegalArgumentException.

Default value:
400ms
Returns:
the duration property
See Also:
  • getDuration()
  • setDuration(Duration)

setFromX

public final void setFromX(double value)
Sets the value of the fromX property.
Property description:
Specifies the start X scale value of this ScaleTransition.

It is not possible to change fromX of a running ScaleTransition. If the value of fromX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Parameters:
value - the value for the fromX property
See Also:
  • getFromX()
  • fromXProperty()

getFromX

public final double getFromX()
Gets the value of the fromX property.
Property description:
Specifies the start X scale value of this ScaleTransition.

It is not possible to change fromX of a running ScaleTransition. If the value of fromX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the value of the fromX property
See Also:
  • setFromX(double)
  • fromXProperty()

fromXProperty

public final DoubleProperty fromXProperty()
Specifies the start X scale value of this ScaleTransition.

It is not possible to change fromX of a running ScaleTransition. If the value of fromX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the fromX property
See Also:
  • getFromX()
  • setFromX(double)

setFromY

public final void setFromY(double value)
Sets the value of the fromY property.
Property description:
Specifies the start Y scale value of this ScaleTransition.

It is not possible to change fromY of a running ScaleTransition. If the value of fromY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Parameters:
value - the value for the fromY property
See Also:
  • getFromY()
  • fromYProperty()

getFromY

public final double getFromY()
Gets the value of the fromY property.
Property description:
Specifies the start Y scale value of this ScaleTransition.

It is not possible to change fromY of a running ScaleTransition. If the value of fromY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the value of the fromY property
See Also:
  • setFromY(double)
  • fromYProperty()

fromYProperty

public final DoubleProperty fromYProperty()
Specifies the start Y scale value of this ScaleTransition.

It is not possible to change fromY of a running ScaleTransition. If the value of fromY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the fromY property
See Also:
  • getFromY()
  • setFromY(double)

setFromZ

public final void setFromZ(double value)
Sets the value of the fromZ property.
Property description:
Specifies the start Z scale value of this ScaleTransition.

It is not possible to change fromZ of a running ScaleTransition. If the value of fromZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Parameters:
value - the value for the fromZ property
See Also:
  • getFromZ()
  • fromZProperty()

getFromZ

public final double getFromZ()
Gets the value of the fromZ property.
Property description:
Specifies the start Z scale value of this ScaleTransition.

It is not possible to change fromZ of a running ScaleTransition. If the value of fromZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the value of the fromZ property
See Also:
  • setFromZ(double)
  • fromZProperty()

fromZProperty

public final DoubleProperty fromZProperty()
Specifies the start Z scale value of this ScaleTransition.

It is not possible to change fromZ of a running ScaleTransition. If the value of fromZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the fromZ property
See Also:
  • getFromZ()
  • setFromZ(double)

setToX

public final void setToX(double value)
Sets the value of the toX property.
Property description:
Specifies the stop X scale value of this ScaleTransition.

It is not possible to change toX of a running ScaleTransition. If the value of toX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Parameters:
value - the value for the toX property
See Also:
  • getToX()
  • toXProperty()

getToX

public final double getToX()
Gets the value of the toX property.
Property description:
Specifies the stop X scale value of this ScaleTransition.

It is not possible to change toX of a running ScaleTransition. If the value of toX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the value of the toX property
See Also:
  • setToX(double)
  • toXProperty()

toXProperty

public final DoubleProperty toXProperty()
Specifies the stop X scale value of this ScaleTransition.

It is not possible to change toX of a running ScaleTransition. If the value of toX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the toX property
See Also:
  • getToX()
  • setToX(double)

setToY

public final void setToY(double value)
Sets the value of the toY property.
Property description:
The stop Y scale value of this ScaleTransition.

It is not possible to change toY of a running ScaleTransition. If the value of toY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Parameters:
value - the value for the toY property
See Also:
  • getToY()
  • toYProperty()

getToY

public final double getToY()
Gets the value of the toY property.
Property description:
The stop Y scale value of this ScaleTransition.

It is not possible to change toY of a running ScaleTransition. If the value of toY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the value of the toY property
See Also:
  • setToY(double)
  • toYProperty()

toYProperty

public final DoubleProperty toYProperty()
The stop Y scale value of this ScaleTransition.

It is not possible to change toY of a running ScaleTransition. If the value of toY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the toY property
See Also:
  • getToY()
  • setToY(double)

setToZ

public final void setToZ(double value)
Sets the value of the toZ property.
Property description:
The stop Z scale value of this ScaleTransition.

It is not possible to change toZ of a running ScaleTransition. If the value of toZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Parameters:
value - the value for the toZ property
See Also:
  • getToZ()
  • toZProperty()

getToZ

public final double getToZ()
Gets the value of the toZ property.
Property description:
The stop Z scale value of this ScaleTransition.

It is not possible to change toZ of a running ScaleTransition. If the value of toZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the value of the toZ property
See Also:
  • setToZ(double)
  • toZProperty()

toZProperty

public final DoubleProperty toZProperty()
The stop Z scale value of this ScaleTransition.

It is not possible to change toZ of a running ScaleTransition. If the value of toZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Default value:
Double.NaN
Returns:
the toZ property
See Also:
  • getToZ()
  • setToZ(double)

setByX

public final void setByX(double value)
Sets the value of the byX property.
Property description:
Specifies the incremented stop X scale value, from the start, of this ScaleTransition.

It is not possible to change byX of a running ScaleTransition. If the value of byX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Parameters:
value - the value for the byX property
See Also:
  • getByX()
  • byXProperty()

getByX

public final double getByX()
Gets the value of the byX property.
Property description:
Specifies the incremented stop X scale value, from the start, of this ScaleTransition.

It is not possible to change byX of a running ScaleTransition. If the value of byX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Returns:
the value of the byX property
See Also:
  • setByX(double)
  • byXProperty()

byXProperty

public final DoubleProperty byXProperty()
Specifies the incremented stop X scale value, from the start, of this ScaleTransition.

It is not possible to change byX of a running ScaleTransition. If the value of byX is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Returns:
the byX property
See Also:
  • getByX()
  • setByX(double)

setByY

public final void setByY(double value)
Sets the value of the byY property.
Property description:
Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.

It is not possible to change byY of a running ScaleTransition. If the value of byY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Parameters:
value - the value for the byY property
See Also:
  • getByY()
  • byYProperty()

getByY

public final double getByY()
Gets the value of the byY property.
Property description:
Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.

It is not possible to change byY of a running ScaleTransition. If the value of byY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Returns:
the value of the byY property
See Also:
  • setByY(double)
  • byYProperty()

byYProperty

public final DoubleProperty byYProperty()
Specifies the incremented stop Y scale value, from the start, of this ScaleTransition.

It is not possible to change byY of a running ScaleTransition. If the value of byY is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Returns:
the byY property
See Also:
  • getByY()
  • setByY(double)

setByZ

public final void setByZ(double value)
Sets the value of the byZ property.
Property description:
Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.

It is not possible to change byZ of a running ScaleTransition. If the value of byZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Parameters:
value - the value for the byZ property
See Also:
  • getByZ()
  • byZProperty()

getByZ

public final double getByZ()
Gets the value of the byZ property.
Property description:
Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.

It is not possible to change byZ of a running ScaleTransition. If the value of byZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Returns:
the value of the byZ property
See Also:
  • setByZ(double)
  • byZProperty()

byZProperty

public final DoubleProperty byZProperty()
Specifies the incremented stop Z scale value, from the start, of this ScaleTransition.

It is not possible to change byZ of a running ScaleTransition. If the value of byZ is changed for a running ScaleTransition, the animation has to be stopped and started again to pick up the new value.

Returns:
the byZ property
See Also:
  • getByZ()
  • setByZ(double)

interpolate

public void interpolate(double frac)
The method interpolate() has to be provided by implementations of Transition. While a Transition is running, this method is called in every frame. The parameter defines the current position with the animation. At the start, the fraction will be 0.0 and at the end it will be 1.0. How the parameter increases, depends on the interpolator, e.g. if the interpolator is Interpolator.LINEAR, the fraction will increase linear. This method must not be called by the user directly.
Specified by:
interpolate in class Transition
Parameters:
frac - The relative position

Report a bug or suggest an enhancement
Copyright © 2008, 2025, Oracle and/or its affiliates. All rights reserved.

© 2008, 2025, Oracle and/or its affiliates. All rights reserved.
Documentation extracted from JavaFX API Documentation.
Licensed under the GNU General Public License, version 2, with the Classpath Exception.
Java, JavaFX and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.

Spec-Zone.ru

Настройки Оффлайн Что нового Помощь О нас
Spec-Zone .ru
спецификации, руководства, описания, API