Class Dialog<R>

java.lang.Object

javafx.scene.control.Dialog<R>

Type Parameters:: R - The return type of the dialog, via the result property.

All Implemented Interfaces:: EventTarget

Direct Known Subclasses:: Alert, ChoiceDialog, TextInputDialog

public class Dialog<R> extends Object implements EventTarget

A Dialog in JavaFX wraps a DialogPane and provides the necessary API to present it to end users. In JavaFX 8u40, this essentially means that the DialogPane is shown to users inside a Stage, but future releases may offer alternative options (such as 'lightweight' or 'internal' dialogs). This API therefore is intentionally ignorant of the underlying implementation, and attempts to present a common API for all possible implementations.

The Dialog class has a single generic type, R, which is used to represent the type of the result property (and also, how to convert from ButtonType to R, through the use of the result converter Callback).

Critical note: It is critical that all developers who choose to create their own dialogs by extending the Dialog class understand the importance of the result converter property. A result converter must always be set, whenever the R type is not Void or ButtonType. If this is not heeded, developers will find that they get ClassCastExceptions in their code, for failure to convert from ButtonType via the result converter.

It is likely that most developers would be better served using either the Alert class (for pre-defined, notification-style alerts), or either of the two pre-built dialogs (TextInputDialog and ChoiceDialog), depending on their needs.

Once a Dialog is instantiated, the next step is to configure it. Almost all properties on Dialog are not related to the content of the Dialog, the only exceptions are contentTextProperty(), headerTextProperty(), and graphicProperty(), and these properties are simply forwarding API onto the respective properties on the DialogPane stored in the dialog pane property. These three properties are forwarded from DialogPane for developer convenience. For developers wanting to configure their dialog, they will in many cases be required to use code along the lines of dialog.getDialogPane().setExpandableContent(node).

After configuring these properties, all that remains is to consider whether the buttons (created using ButtonType and the DialogPane.createButton(ButtonType) method) are fully configured. Developers will quickly find that the amount of configurability offered via the ButtonType class is minimal. This is intentional, but does not mean that developers can not modify the buttons created by the ButtonType that have been specified. To do this, developers simply call the DialogPane.lookupButton(ButtonType) method with the ButtonType (assuming it has already been set in the DialogPane.getButtonTypes() list. The returned Node is typically of type Button, but this depends on if the DialogPane.createButton(ButtonType) method has been overridden. A typical approach is therefore along the following lines:

 ButtonType loginButtonType = new ButtonType("Login", ButtonData.OK_DONE);
 Dialog<String> dialog = new Dialog<>();
 dialog.setTitle("Login Dialog");
 dialog.setContentText("Would you like to log in?");
 dialog.getDialogPane().getButtonTypes().add(loginButtonType);
 boolean disabled = false; // computed based on content of text fields, for example
 dialog.getDialogPane().lookupButton(loginButtonType).setDisable(disabled);
 dialog.showAndWait();

Once a Dialog is instantiated and fully configured, the next step is to show it. More often than not, dialogs are shown in a modal and blocking fashion. 'Modal' means that the dialog prevents user interaction with the owning application whilst it is showing, and 'blocking' means that code execution stops at the point in which the dialog is shown. This means that you can show a dialog, await the user response, and then continue running the code that directly follows the show call, giving developers the ability to immediately deal with the user input from the dialog (if relevant).

JavaFX dialogs are modal by default (you can change this via the initModality(javafx.stage.Modality) API). To specify whether you want blocking or non-blocking dialogs, developers simply choose to call showAndWait() or show() (respectively). By default most developers should choose to use showAndWait(), given the ease of coding in these situations. Shown below is three code snippets, showing three equally valid ways of showing a dialog:

Option 1: The 'traditional' approach

 Optional<ButtonType> result = dialog.showAndWait();
 if (result.isPresent() && result.get() == ButtonType.OK) {
     formatSystem();
 }

Option 2: The traditional + Optional approach

 dialog.showAndWait().ifPresent(response -> {
     if (response == ButtonType.OK) {
         formatSystem();
     }
 });

Option 3: The fully lambda approach

 dialog.showAndWait()
       .filter(response -> response == ButtonType.OK)
       .ifPresent(response -> formatSystem());

There is no better or worse option of the three listed above, so developers are encouraged to work to their own style preferences. The purpose of showing the above is to help introduce developers to the Optional API, which is new in Java 8 and may be foreign to many developers.

Dialog Validation / Intercepting Button Actions

In some circumstances it is desirable to prevent a dialog from closing until some aspect of the dialog becomes internally consistent (e.g. a form inside the dialog has all fields in a valid state). To do this, users of the dialogs API should become familiar with the DialogPane.lookupButton(ButtonType) method. By passing in a ButtonType (that has already been set in the button types list), users will be returned a Node that is typically of type Button (but this depends on if the DialogPane.createButton(ButtonType) method has been overridden). With this button, users may add an event filter that is called before the button does its usual event handling, and as such users may prevent the event handling by consuming the event. Here's a simplified example:

 final Button btOk = (Button) dlg.getDialogPane().lookupButton(ButtonType.OK);
 btOk.addEventFilter(ActionEvent.ACTION, event -> {
     if (!validateAndStore()) {
         event.consume();
     }
 });

Dialog Closing Rules

It is important to understand what happens when a Dialog is closed, and also how a Dialog can be closed, especially in abnormal closing situations (such as when the 'X' button is clicked in a dialogs title bar, or when operating system specific keyboard shortcuts (such as alt-F4 on Windows) are entered). Fortunately, the outcome is well-defined in these situations, and can be best summarised in the following bullet points:

JavaFX dialogs can only be closed 'abnormally' (as defined above) in two situations:
1. When the dialog only has one button, or
2. When the dialog has multiple buttons, as long as one of them meets one of the following requirements:
  1. The button has a ButtonType whose ButtonBar.ButtonData is of type ButtonBar.ButtonData.CANCEL_CLOSE.
  2. The button has a ButtonType whose ButtonBar.ButtonData returns true when ButtonBar.ButtonData.isCancelButton() is called.
In all other situations, the dialog will refuse to respond to all close requests, remaining open until the user clicks on one of the available buttons in the DialogPane area of the dialog.
If a dialog is closed abnormally, and if the dialog contains a button which meets one of the two criteria above, the dialog will attempt to set the result property to whatever value is returned from calling the result converter with the first matching ButtonType.
If for any reason the result converter returns null, or if the dialog is closed when only one non-cancel button is present, the result property will be null, and the showAndWait() method will return Optional.empty(). This later point means that, if you use either of option 2 or option 3 (as presented earlier in this class documentation), the Optional.ifPresent(java.util.function.Consumer) lambda will never be called, and code will continue executing as if the dialog had not returned any value at all.

Since:

JavaFX 8u40

See Also:

Property Summary

Type	Property	Description
`final StringProperty`	`contentText`	A property representing the content text for the dialog pane.
`final ObjectProperty<DialogPane>`	`dialogPane`	The root node of the dialog, the `DialogPane` contains all visual elements shown in the dialog.
`final ObjectProperty<Node>`	`graphic`	The dialog graphic, presented either in the header, if one is showing, or to the left of the `content`.
`final StringProperty`	`headerText`	A property representing the header text for the dialog pane.
`final ReadOnlyDoubleProperty`	`height`	Property representing the height of the dialog.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onCloseRequest`	Called when there is an external request to close this `Dialog`.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onHidden`	Called just after the Dialog has been hidden.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onHiding`	Called just prior to the Dialog being hidden.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onShowing`	Called just prior to the Dialog being shown.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onShown`	Called just after the Dialog is shown.
`final BooleanProperty`	`resizable`	Represents whether the dialog is resizable.
`final ObjectProperty<Callback<ButtonType,R>>`	`resultConverter`	API to convert the `ButtonType` that the user clicked on into a result that can be returned via the `result` property.
`final ObjectProperty<R>`	`result`	A property representing what has been returned from the dialog.
`final ReadOnlyBooleanProperty`	`showing`	Represents whether the dialog is currently showing.
`final StringProperty`	`title`	Return the titleProperty of the dialog.
`final ReadOnlyDoubleProperty`	`width`	Property representing the width of the dialog.
`final ReadOnlyDoubleProperty`	`x`	The horizontal location of this `Dialog`.
`final ReadOnlyDoubleProperty`	`y`	The vertical location of this `Dialog`.

Constructor Summary

Constructor	Description
`Dialog()`	Creates a dialog without a specified owner.

Method Summary

Modifier and Type	Method	Description
`final <E extends Event> void`	`addEventFilter(EventType<E> eventType, EventHandler<? super E> eventFilter)`	Registers an event filter for this target.
`final <E extends Event> void`	`addEventHandler(EventType<E> eventType, EventHandler<? super E> eventHandler)`	Registers an event handler for this target.
`EventDispatchChain`	`buildEventDispatchChain(EventDispatchChain tail)`	Construct an event dispatch chain for this target.
`final void`	`close()`	Closes this `Dialog`.
`final StringProperty`	`contentTextProperty()`	A property representing the content text for the dialog pane.
`final ObjectProperty<DialogPane>`	`dialogPaneProperty()`	The root node of the dialog, the `DialogPane` contains all visual elements shown in the dialog.
`final String`	`getContentText()`	Returns the currently-set content text for this DialogPane.
`final DialogPane`	`getDialogPane()`	Gets the value of the `dialogPane` property.
`final Node`	`getGraphic()`	Gets the value of the `graphic` property.
`final String`	`getHeaderText()`	Returns the currently-set header text for this DialogPane.
`final double`	`getHeight()`	Returns the height of the dialog.
`final Modality`	`getModality()`	Retrieves the modality attribute for this dialog.
`final EventHandler<DialogEvent>`	`getOnCloseRequest()`	Gets the value of the `onCloseRequest` property.
`final EventHandler<DialogEvent>`	`getOnHidden()`	Gets the value of the `onHidden` property.
`final EventHandler<DialogEvent>`	`getOnHiding()`	Gets the value of the `onHiding` property.
`final EventHandler<DialogEvent>`	`getOnShowing()`	Gets the value of the `onShowing` property.
`final EventHandler<DialogEvent>`	`getOnShown()`	Gets the value of the `onShown` property.
`final Window`	`getOwner()`	Retrieves the owner Window for this dialog, or null for an unowned dialog.
`final R`	`getResult()`	Gets the value of the `result` property.
`final Callback<ButtonType,R>`	`getResultConverter()`	Gets the value of the `resultConverter` property.
`final String`	`getTitle()`	Return the title of the dialog.
`final double`	`getWidth()`	Returns the width of the dialog.
`final double`	`getX()`	Gets the value of the `x` property.
`final double`	`getY()`	Gets the value of the `y` property.
`final ObjectProperty<Node>`	`graphicProperty()`	The dialog graphic, presented either in the header, if one is showing, or to the left of the `content`.
`final StringProperty`	`headerTextProperty()`	A property representing the header text for the dialog pane.
`final ReadOnlyDoubleProperty`	`heightProperty()`	Property representing the height of the dialog.
`final void`	`hide()`	Hides this `Dialog`.
`final void`	`initModality(Modality modality)`	Specifies the modality for this dialog.
`final void`	`initOwner(Window window)`	Specifies the owner `Window` for this dialog, or null for a top-level, unowned dialog.
`final void`	`initStyle(StageStyle style)`	Specifies the style for this dialog.
`final boolean`	`isResizable()`	Returns whether or not the dialog is resizable.
`final boolean`	`isShowing()`	Returns whether or not the dialog is showing.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onCloseRequestProperty()`	Called when there is an external request to close this `Dialog`.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onHiddenProperty()`	Called just after the Dialog has been hidden.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onHidingProperty()`	Called just prior to the Dialog being hidden.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onShowingProperty()`	Called just prior to the Dialog being shown.
`final ObjectProperty<EventHandler<DialogEvent>>`	`onShownProperty()`	Called just after the Dialog is shown.
`final <E extends Event> void`	`removeEventFilter(EventType<E> eventType, EventHandler<? super E> eventFilter)`	Unregisters a previously registered event filter from this target.
`final <E extends Event> void`	`removeEventHandler(EventType<E> eventType, EventHandler<? super E> eventHandler)`	Unregisters a previously registered event handler from this target.
`final BooleanProperty`	`resizableProperty()`	Represents whether the dialog is resizable.
`final ObjectProperty<Callback<ButtonType,R>>`	`resultConverterProperty()`	API to convert the `ButtonType` that the user clicked on into a result that can be returned via the `result` property.
`final ObjectProperty<R>`	`resultProperty()`	A property representing what has been returned from the dialog.
`final void`	`setContentText(String contentText)`	Sets the string to show in the dialog content area.
`final void`	`setDialogPane(DialogPane value)`	Sets the value of the `dialogPane` property.
`final void`	`setGraphic(Node graphic)`	Sets the dialog graphic, which will be displayed either in the header, if one is showing, or to the left of the `content`.
`final void`	`setHeaderText(String headerText)`	Sets the string to show in the dialog header area.
`final void`	`setHeight(double height)`	Sets the height of the dialog.
`final void`	`setOnCloseRequest(EventHandler<DialogEvent> value)`	Sets the value of the `onCloseRequest` property.
`final void`	`setOnHidden(EventHandler<DialogEvent> value)`	Sets the value of the `onHidden` property.
`final void`	`setOnHiding(EventHandler<DialogEvent> value)`	Sets the value of the `onHiding` property.
`final void`	`setOnShowing(EventHandler<DialogEvent> value)`	Sets the value of the `onShowing` property.
`final void`	`setOnShown(EventHandler<DialogEvent> value)`	Sets the value of the `onShown` property.
`final void`	`setResizable(boolean resizable)`	Sets whether the dialog can be resized by the user.
`final void`	`setResult(R value)`	Sets the value of the `result` property.
`final void`	`setResultConverter(Callback<ButtonType,R> value)`	Sets the value of the `resultConverter` property.
`final void`	`setTitle(String title)`	Change the Title of the dialog.
`final void`	`setWidth(double width)`	Sets the width of the dialog.
`final void`	`setX(double x)`	Sets the value of the `x` property.
`final void`	`setY(double y)`	Sets the value of the `y` property.
`final void`	`show()`	Shows the dialog but does not wait for a user response (in other words, this brings up a non-blocking dialog).
`final Optional<R>`	`showAndWait()`	Shows the dialog and waits for the user response (in other words, brings up a blocking dialog, with the returned value the users input).
`final ReadOnlyBooleanProperty`	`showingProperty()`	Represents whether the dialog is currently showing.
`final StringProperty`	`titleProperty()`	Return the titleProperty of the dialog.
`final ReadOnlyDoubleProperty`	`widthProperty()`	Property representing the width of the dialog.
`final ReadOnlyDoubleProperty`	`xProperty()`	The horizontal location of this `Dialog`.
`final ReadOnlyDoubleProperty`	`yProperty()`	The vertical location of this `Dialog`.

Methods declared in class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Property Details

dialogPane

public final ObjectProperty<DialogPane> dialogPaneProperty

The root node of the dialog, the DialogPane contains all visual elements shown in the dialog. As such, it is possible to completely adjust the display of the dialog by modifying the existing dialog pane or creating a new one.

See Also:

contentText

public final StringProperty contentTextProperty

A property representing the content text for the dialog pane. The content text is lower precedence than the content node, meaning that if both the content node and the contentText properties are set, the content text will not be displayed in a default DialogPane instance.

See Also:

headerText

public final StringProperty headerTextProperty

A property representing the header text for the dialog pane. The header text is lower precedence than the header node, meaning that if both the header node and the headerText properties are set, the header text will not be displayed in a default DialogPane instance.

See Also:

graphic

public final ObjectProperty<Node> graphicProperty

The dialog graphic, presented either in the header, if one is showing, or to the left of the content.

See Also:

result

public final ObjectProperty<R> resultProperty

A property representing what has been returned from the dialog. A result is generated through the result converter, which is intended to convert from the ButtonType that the user clicked on into a value of type R. Refer to the Dialog class JavaDoc for more details.

See Also:

resultConverter

public final ObjectProperty<Callback<ButtonType,R>> resultConverterProperty

API to convert the ButtonType that the user clicked on into a result that can be returned via the result property. This is necessary as ButtonType represents the visual button within the dialog, and do not know how to map themselves to a valid result - that is a requirement of the dialog implementation by making use of the result converter. In some cases, the result type of a Dialog subclass is ButtonType (which means that the result converter can be null), but in some cases (where the result type, R, is not ButtonType or Void), this callback must be specified.

See Also:

showing

public final ReadOnlyBooleanProperty showingProperty

Represents whether the dialog is currently showing.

See Also:

resizable

public final BooleanProperty resizableProperty

Represents whether the dialog is resizable.

See Also:

width

public final ReadOnlyDoubleProperty widthProperty

Property representing the width of the dialog.

See Also:

height

public final ReadOnlyDoubleProperty heightProperty

Property representing the height of the dialog.

See Also:

title

public final StringProperty titleProperty

Return the titleProperty of the dialog.

See Also:

x

public final ReadOnlyDoubleProperty xProperty

The horizontal location of this Dialog. Changing this attribute will move the Dialog horizontally.

See Also:

y

public final ReadOnlyDoubleProperty yProperty

The vertical location of this Dialog. Changing this attribute will move the Dialog vertically.

See Also:

onShowing

public final ObjectProperty<EventHandler<DialogEvent>> onShowingProperty

Called just prior to the Dialog being shown.

See Also:

onShown

public final ObjectProperty<EventHandler<DialogEvent>> onShownProperty

Called just after the Dialog is shown.

See Also:

onHiding

public final ObjectProperty<EventHandler<DialogEvent>> onHidingProperty

Called just prior to the Dialog being hidden.

See Also:

onHidden

public final ObjectProperty<EventHandler<DialogEvent>> onHiddenProperty

Called just after the Dialog has been hidden. When the Dialog is hidden, this event handler is invoked allowing the developer to clean up resources or perform other tasks when the Alert is closed.

See Also:

onCloseRequest

public final ObjectProperty<EventHandler<DialogEvent>> onCloseRequestProperty

Called when there is an external request to close this Dialog. The installed event handler can prevent dialog closing by consuming the received event.

See Also:

Constructor Details

Dialog

public Dialog()

Creates a dialog without a specified owner.

Method Details

show

public final void show()

Shows the dialog but does not wait for a user response (in other words, this brings up a non-blocking dialog). Users of this API must either poll the result property, or else add a listener to the result property to be informed of when it is set.

Throws:: IllegalStateException - if this method is called on a thread other than the JavaFX Application Thread.

showAndWait

public final Optional<R> showAndWait()

Shows the dialog and waits for the user response (in other words, brings up a blocking dialog, with the returned value the users input).

This method must be called on the JavaFX Application thread. Additionally, it must either be called from an input event handler or from the run method of a Runnable passed to Platform.runLater. It must not be called during animation or layout processing.

Returns:: An Optional that contains the result. Refer to the Dialog class documentation for more detail.
Throws:: IllegalStateException - if this method is called on a thread other than the JavaFX Application Thread.; IllegalStateException - if this method is called during animation or layout processing.

close

public final void close()

Closes this Dialog. This call is equivalent to hide().

hide

public final void hide()

Hides this Dialog.

initModality

public final void initModality(Modality modality)

Specifies the modality for this dialog. This must be done prior to making the dialog visible. The modality is one of: Modality.NONE, Modality.WINDOW_MODAL, or Modality.APPLICATION_MODAL.

Default value:: Modality.APPLICATION_MODAL
Parameters:: modality - the modality for this dialog.
Throws:: IllegalStateException - if this property is set after the dialog has ever been made visible.

getModality

public final Modality getModality()

Retrieves the modality attribute for this dialog.

Returns:: the modality.

initStyle

public final void initStyle(StageStyle style)

Specifies the style for this dialog. This must be done prior to making the dialog visible. The style is one of: StageStyle.DECORATED, StageStyle.UNDECORATED, StageStyle.TRANSPARENT, StageStyle.UTILITY, or StageStyle.UNIFIED.

Default value:: StageStyle.DECORATED
Parameters:: style - the style for this dialog.
Throws:: IllegalStateException - if this property is set after the dialog has ever been made visible.

initOwner

public final void initOwner(Window window)

Specifies the owner Window for this dialog, or null for a top-level, unowned dialog. This must be done prior to making the dialog visible.

Default value:: null
Parameters:: window - the owner Window for this dialog.
Throws:: IllegalStateException - if this property is set after the dialog has ever been made visible.

getOwner

public final Window getOwner()

Retrieves the owner Window for this dialog, or null for an unowned dialog.

Returns:: the owner Window.

dialogPaneProperty

public final ObjectProperty<DialogPane> dialogPaneProperty()

Returns:

the dialogPane property

See Also:

getDialogPane

public final DialogPane getDialogPane()

Gets the value of the dialogPane property.

Property description:

Returns:

the value of the dialogPane property

See Also:

setDialogPane

public final void setDialogPane(DialogPane value)

Sets the value of the dialogPane property.

Property description:

Parameters:

value - the value for the dialogPane property

See Also:

contentTextProperty

public final StringProperty contentTextProperty()

Returns:

the property representing the content text for the dialog pane

See Also:

getContentText

public final String getContentText()

Returns the currently-set content text for this DialogPane.

Returns:: the currently-set content text for this DialogPane

setContentText

public final void setContentText(String contentText)

Sets the string to show in the dialog content area. Note that the content text is lower precedence than the content node, meaning that if both the content node and the contentText properties are set, the content text will not be displayed in a default DialogPane instance.

Parameters:: contentText - the string to show in the dialog content area

headerTextProperty

public final StringProperty headerTextProperty()

Returns:

a property representing the header text for the dialog pane

See Also:

getHeaderText

public final String getHeaderText()

Returns the currently-set header text for this DialogPane.

Returns:: the currently-set header text for this DialogPane

setHeaderText

public final void setHeaderText(String headerText)

Sets the string to show in the dialog header area. Note that the header text is lower precedence than the header node, meaning that if both the header node and the headerText properties are set, the header text will not be displayed in a default DialogPane instance.

Parameters:: headerText - the string to show in the dialog header area

graphicProperty

public final ObjectProperty<Node> graphicProperty()

The dialog graphic, presented either in the header, if one is showing, or to the left of the content.

Returns:

An ObjectProperty wrapping the current graphic.

See Also:

getGraphic

public final Node getGraphic()

Gets the value of the graphic property.

Property description:

The dialog graphic, presented either in the header, if one is showing, or to the left of the content.

Returns:

the value of the graphic property

See Also:

setGraphic

public final void setGraphic(Node graphic)

Sets the dialog graphic, which will be displayed either in the header, if one is showing, or to the left of the content.

Parameters:: graphic - The new dialog graphic, or null if no graphic should be shown.

resultProperty

public final ObjectProperty<R> resultProperty()

Returns:

a property representing what has been returned from the dialog

See Also:

getResult

public final R getResult()

Gets the value of the result property.

Property description:

Returns:

the value of the result property

See Also:

setResult

public final void setResult(R value)

Sets the value of the result property.

Property description:

Parameters:

value - the value for the result property

See Also:

resultConverterProperty

public final ObjectProperty<Callback<ButtonType,R>> resultConverterProperty()

Returns:

the API to convert the ButtonType that the user clicked on

See Also:

getResultConverter

public final Callback<ButtonType,R> getResultConverter()

Gets the value of the resultConverter property.

Property description:

Returns:

the value of the resultConverter property

See Also:

setResultConverter

public final void setResultConverter(Callback<ButtonType,R> value)

Sets the value of the resultConverter property.

Property description:

Parameters:

value - the value for the resultConverter property

See Also:

showingProperty

public final ReadOnlyBooleanProperty showingProperty()

Represents whether the dialog is currently showing.

Returns:

the property representing whether the dialog is currently showing

See Also:

isShowing

public final boolean isShowing()

Returns whether or not the dialog is showing.

Returns:: true if dialog is showing.

resizableProperty

public final BooleanProperty resizableProperty()

Represents whether the dialog is resizable.

Returns:

the property representing whether the dialog is resizable

See Also:

isResizable

public final boolean isResizable()

Returns whether or not the dialog is resizable.

Returns:: true if dialog is resizable.

setResizable

public final void setResizable(boolean resizable)

Sets whether the dialog can be resized by the user. Resizable dialogs can also be maximized ( maximize button becomes visible)

Parameters:: resizable - true if dialog should be resizable.

widthProperty

public final ReadOnlyDoubleProperty widthProperty()

Property representing the width of the dialog.

Returns:

the property representing the width of the dialog

See Also:

getWidth

public final double getWidth()

Returns the width of the dialog.

Returns:: the width of the dialog

setWidth

public final void setWidth(double width)

Sets the width of the dialog.

Parameters:: width - the width of the dialog

heightProperty

public final ReadOnlyDoubleProperty heightProperty()

Property representing the height of the dialog.

Returns:

the property representing the height of the dialog

See Also:

getHeight

public final double getHeight()

Returns the height of the dialog.

Returns:: the height of the dialog

setHeight

public final void setHeight(double height)

Sets the height of the dialog.

Parameters:: height - the height of the dialog

titleProperty

public final StringProperty titleProperty()

Return the titleProperty of the dialog.

Returns:

the titleProperty of the dialog

See Also:

getTitle

public final String getTitle()

Return the title of the dialog.

Returns:: the title of the dialog

setTitle

public final void setTitle(String title)

Change the Title of the dialog.

Parameters:: title - the Title of the dialog

getX

public final double getX()

Gets the value of the x property.

Property description:

The horizontal location of this Dialog. Changing this attribute will move the Dialog horizontally.

Returns:

the value of the x property

See Also:

setX

public final void setX(double x)

Sets the value of the x property.

Property description:

The horizontal location of this Dialog. Changing this attribute will move the Dialog horizontally.

Parameters:

x - the value for the x property

See Also:

xProperty

public final ReadOnlyDoubleProperty xProperty()

The horizontal location of this Dialog. Changing this attribute will move the Dialog horizontally.

Returns:

the horizontal location of this Dialog

See Also:

getY

public final double getY()

Gets the value of the y property.

Property description:

The vertical location of this Dialog. Changing this attribute will move the Dialog vertically.

Returns:

the value of the y property

See Also:

setY

public final void setY(double y)

Sets the value of the y property.

Property description:

The vertical location of this Dialog. Changing this attribute will move the Dialog vertically.

Parameters:

y - the value for the y property

See Also:

yProperty

public final ReadOnlyDoubleProperty yProperty()

The vertical location of this Dialog. Changing this attribute will move the Dialog vertically.

Returns:

the vertical location of this Dialog

See Also:

buildEventDispatchChain

public EventDispatchChain buildEventDispatchChain(EventDispatchChain tail)

Description copied from interface: EventTarget

Construct an event dispatch chain for this target. The event dispatch chain contains event dispatchers which might be interested in processing of events targeted at this EventTarget. This event target is not automatically added to the chain, so if it wants to process events, it needs to add an EventDispatcher for itself to the chain.

In the case the event target is part of some hierarchy, the chain for it is usually built from event dispatchers collected from the root of the hierarchy to the event target.

The event dispatch chain is constructed by modifications to the provided initial event dispatch chain. The returned chain should have the initial chain at its end so the dispatchers should be prepended to the initial chain.

The caller shouldn't assume that the initial chain remains unchanged nor that the returned value will reference a different chain.

Specified by:: buildEventDispatchChain in interface EventTarget
Parameters:: tail - the initial chain to build from
Returns:: the resulting event dispatch chain for this target

addEventHandler

public final <E extends Event> void addEventHandler(EventType<E> eventType, EventHandler<? super E> eventHandler)

Description copied from interface: EventTarget

Registers an event handler for this target.

The handler is called when the target receives an Event of the specified type during the bubbling phase of event delivery.

Specified by:: addEventHandler in interface EventTarget
Type Parameters:: E - the event class of the handler
Parameters:: eventType - the type of the events received by the handler; eventHandler - the event handler

removeEventHandler

public final <E extends Event> void removeEventHandler(EventType<E> eventType, EventHandler<? super E> eventHandler)

Description copied from interface: EventTarget

Unregisters a previously registered event handler from this target.

Since it is possible to register a single EventHandler instance for different event types, the caller needs to specify the event type from which the handler should be unregistered.

Specified by:: removeEventHandler in interface EventTarget
Type Parameters:: E - the event class of the handler
Parameters:: eventType - the event type from which to unregister; eventHandler - the event handler

addEventFilter

public final <E extends Event> void addEventFilter(EventType<E> eventType, EventHandler<? super E> eventFilter)

Description copied from interface: EventTarget

Registers an event filter for this target.

The filter is called when the target receives an Event of the specified type during the capturing phase of event delivery.

Specified by:: addEventFilter in interface EventTarget
Type Parameters:: E - the event class of the filter
Parameters:: eventType - the type of the events received by the filter; eventFilter - the event filter

removeEventFilter

public final <E extends Event> void removeEventFilter(EventType<E> eventType, EventHandler<? super E> eventFilter)

Description copied from interface: EventTarget

Unregisters a previously registered event filter from this target.

Since it is possible to register a single EventHandler instance for different event types, the caller needs to specify the event type from which the filter should be unregistered.

Specified by:: removeEventFilter in interface EventTarget
Type Parameters:: E - the event class of the filter
Parameters:: eventType - the event type from which to unregister; eventFilter - the event filter

setOnShowing

public final void setOnShowing(EventHandler<DialogEvent> value)

Sets the value of the onShowing property.

Property description:

Called just prior to the Dialog being shown.

Parameters:

value - the value for the onShowing property

See Also:

getOnShowing

public final EventHandler<DialogEvent> getOnShowing()

Gets the value of the onShowing property.

Property description:

Called just prior to the Dialog being shown.

Returns:

the value of the onShowing property

See Also:

onShowingProperty

public final ObjectProperty<EventHandler<DialogEvent>> onShowingProperty()

Called just prior to the Dialog being shown.

Returns:

the onShowing property

See Also:

setOnShown

public final void setOnShown(EventHandler<DialogEvent> value)

Sets the value of the onShown property.

Property description:

Called just after the Dialog is shown.

Parameters:

value - the value for the onShown property

See Also:

getOnShown

public final EventHandler<DialogEvent> getOnShown()

Gets the value of the onShown property.

Property description:

Called just after the Dialog is shown.

Returns:

the value of the onShown property

See Also:

onShownProperty

public final ObjectProperty<EventHandler<DialogEvent>> onShownProperty()

Called just after the Dialog is shown.

Returns:

the onShown property

See Also:

setOnHiding

public final void setOnHiding(EventHandler<DialogEvent> value)

Sets the value of the onHiding property.

Property description:

Called just prior to the Dialog being hidden.

Parameters:

value - the value for the onHiding property

See Also:

getOnHiding

public final EventHandler<DialogEvent> getOnHiding()

Gets the value of the onHiding property.

Property description:

Called just prior to the Dialog being hidden.

Returns:

the value of the onHiding property

See Also:

onHidingProperty

public final ObjectProperty<EventHandler<DialogEvent>> onHidingProperty()

Called just prior to the Dialog being hidden.

Returns:

the onHiding property

See Also:

setOnHidden

public final void setOnHidden(EventHandler<DialogEvent> value)

Sets the value of the onHidden property.

Property description:

Parameters:

value - the value for the onHidden property

See Also:

getOnHidden

public final EventHandler<DialogEvent> getOnHidden()

Gets the value of the onHidden property.

Property description:

Returns:

the value of the onHidden property

See Also:

onHiddenProperty

public final ObjectProperty<EventHandler<DialogEvent>> onHiddenProperty()

Returns:

the onHidden property

See Also:

setOnCloseRequest

public final void setOnCloseRequest(EventHandler<DialogEvent> value)

Sets the value of the onCloseRequest property.

Property description:

Called when there is an external request to close this Dialog. The installed event handler can prevent dialog closing by consuming the received event.

Parameters:

value - the value for the onCloseRequest property

See Also:

getOnCloseRequest

public final EventHandler<DialogEvent> getOnCloseRequest()

Gets the value of the onCloseRequest property.

Property description:

Called when there is an external request to close this Dialog. The installed event handler can prevent dialog closing by consuming the received event.

Returns:

the value of the onCloseRequest property

See Also:

onCloseRequestProperty

public final ObjectProperty<EventHandler<DialogEvent>> onCloseRequestProperty()

Called when there is an external request to close this Dialog. The installed event handler can prevent dialog closing by consuming the received event.

Returns:

the onCloseRequest property

See Also:

© 2008, 2025, Oracle and/or its affiliates. All rights reserved.
Documentation extracted from JavaFX API Documentation.
Licensed under the GNU General Public License, version 2, with the Classpath Exception.
Java, JavaFX and OpenJDK are trademarks or registered trademarks of Oracle and/or its affiliates.