Class ListPropertyBase<E>

public abstract class ListPropertyBase<E>
extends ListProperty<E>

• Property Summary

  All MethodsInstance MethodsConcrete Methods

  Type	Property and Description
  ReadOnlyBooleanProperty	empty A boolean property that is true, if the list is empty.
  ReadOnlyIntegerProperty	size An integer property that represents the size of the list.

• Constructor Summary

  Constructors

  Constructor and Description
  ListPropertyBase() The Constructor of ListPropertyBase
  ListPropertyBase(ObservableList<E> initialValue) The constructor of the ListPropertyBase.

• Method Summary

  All MethodsInstance MethodsConcrete Methods

  Modifier and Type	Method and Description
  void	addListener(ChangeListener<? super ObservableList<E>> listener) Adds a ChangeListener which will be notified whenever the value of the ObservableValue changes.
  void	addListener(InvalidationListener listener) Adds an InvalidationListener which will be notified whenever the Observable becomes invalid.
  void	addListener(ListChangeListener<? super E> listener) Add a listener to this observable list.
  void	bind(ObservableValue<? extends ObservableList<E>> newObservable) Create a unidirection binding for this Property.
  ReadOnlyBooleanProperty	emptyProperty() A boolean property that is true, if the list is empty.
  protected void	fireValueChangedEvent() Sends notifications to all attached InvalidationListeners, ChangeListeners, and ListChangeListener.
  protected void	fireValueChangedEvent(ListChangeListener.Change<? extends E> change) Sends notifications to all attached InvalidationListeners, ChangeListeners, and ListChangeListener.
  ObservableList<E>	get() Get the wrapped value.
  protected void	invalidated() The method invalidated() can be overridden to receive invalidation notifications.
  boolean	isBound() Can be used to check, if a Property is bound.
  void	removeListener(ChangeListener<? super ObservableList<E>> listener) Removes the given listener from the list of listeners, that are notified whenever the value of the ObservableValue changes.
  void	removeListener(InvalidationListener listener) Removes the given listener from the list of listeners, that are notified whenever the value of the Observable becomes invalid.
  void	removeListener(ListChangeListener<? super E> listener) Tries to removed a listener from this observable list.
  void	set(ObservableList<E> newValue) Set the wrapped value.
  ReadOnlyIntegerProperty	sizeProperty() An integer property that represents the size of the list.
  String	toString() Returns a string representation of this ListPropertyBase object.
  void	unbind() Remove the unidirectional binding for this Property.

  • Methods inherited from class javafx.beans.property.ListProperty

    bindBidirectional, setValue, unbindBidirectional

  • Methods inherited from class javafx.beans.property.ReadOnlyListProperty

    bindContent, bindContentBidirectional, equals, hashCode, unbindContent, unbindContentBidirectional

  • Methods inherited from class javafx.beans.binding.ListExpression

    add, add, addAll, addAll, addAll, asString, clear, contains, containsAll, get, getSize, getValue, indexOf, isEmpty, isEqualTo, isNotEqualTo, isNotNull, isNull, iterator, lastIndexOf, listExpression, listIterator, listIterator, remove, remove, remove, removeAll, removeAll, retainAll, retainAll, set, setAll, setAll, size, subList, toArray, toArray, valueAt, valueAt

  • Methods inherited from class java.lang.Object

    clone, finalize, getClass, notify, notifyAll, wait, wait, wait

  • Methods inherited from interface javafx.beans.property.ReadOnlyProperty

    getBean, getName

  • Methods inherited from interface javafx.beans.value.ObservableValue

    getValue

  • Methods inherited from interface javafx.beans.value.WritableValue

    getValue

  • Methods inherited from interface javafx.collections.ObservableList

    addAll, filtered, remove, removeAll, retainAll, setAll, setAll, sorted, sorted

  • Methods inherited from interface java.util.List

    add, add, addAll, addAll, clear, contains, containsAll, equals, get, hashCode, indexOf, isEmpty, iterator, lastIndexOf, listIterator, listIterator, remove, remove, removeAll, replaceAll, retainAll, set, size, sort, spliterator, subList, toArray, toArray

  • Methods inherited from interface java.util.Collection

    parallelStream, removeIf, stream

  • Methods inherited from interface java.lang.Iterable

    forEach

• Property Detail

  • size

    public ReadOnlyIntegerProperty sizeProperty

    Specified by:

    sizeProperty in class ListExpression<E>

    See Also:

    ListExpression.getSize()

  • empty

    public ReadOnlyBooleanProperty emptyProperty

    Specified by:

    emptyProperty in class ListExpression<E>

    See Also:

    ListExpression.isEmpty()

• Constructor Detail

  • ListPropertyBase

    public ListPropertyBase()

    The Constructor of ListPropertyBase

  • ListPropertyBase

    public ListPropertyBase(ObservableList<E> initialValue)

    The constructor of the ListPropertyBase.

    Parameters:

    initialValue - the initial value of the wrapped value

• Method Detail

  • sizeProperty

    public ReadOnlyIntegerProperty sizeProperty()

    Description copied from class: ListExpression
    An integer property that represents the size of the list.

    Specified by:

    sizeProperty in class ListExpression<E>

    See Also:

    ListExpression.getSize()

  • emptyProperty

    public ReadOnlyBooleanProperty emptyProperty()

    Description copied from class: ListExpression
    A boolean property that is true, if the list is empty.

    Specified by:

    emptyProperty in class ListExpression<E>

    See Also:

    ListExpression.isEmpty()

  • addListener

    public void addListener(InvalidationListener listener)

    Description copied from interface: Observable
    Adds an InvalidationListener which will be notified whenever the Observable becomes invalid. If the same listener is added more than once, then it will be notified more than once. That is, no check is made to ensure uniqueness.

    Note that the same actual InvalidationListener instance may be safely registered for different Observables.

    The Observable stores a strong reference to the listener which will prevent the listener from being garbage collected and may result in a memory leak. It is recommended to either unregister a listener by calling removeListener after use or to use an instance of WeakInvalidationListener avoid this situation.

    Parameters:

    listener - The listener to register

    See Also:

    Observable.removeListener(InvalidationListener)

  • removeListener

    public void removeListener(InvalidationListener listener)

    Description copied from interface: Observable
    Removes the given listener from the list of listeners, that are notified whenever the value of the Observable becomes invalid.

    If the given listener has not been previously registered (i.e. it was never added) then this method call is a no-op. If it had been previously added then it will be removed. If it had been added more than once, then only the first occurrence will be removed.

    Parameters:

    listener - The listener to remove

    See Also:

    Observable.addListener(InvalidationListener)

  • addListener

    public void addListener(ChangeListener<? super ObservableList<E>> listener)

    Description copied from interface: ObservableValue
    Adds a ChangeListener which will be notified whenever the value of the ObservableValue changes. If the same listener is added more than once, then it will be notified more than once. That is, no check is made to ensure uniqueness.

    Note that the same actual ChangeListener instance may be safely registered for different ObservableValues.

    The ObservableValue stores a strong reference to the listener which will prevent the listener from being garbage collected and may result in a memory leak. It is recommended to either unregister a listener by calling removeListener after use or to use an instance of WeakChangeListener avoid this situation.

    Parameters:

    listener - The listener to register

    See Also:

    ObservableValue.removeListener(ChangeListener)

  • removeListener

    public void removeListener(ChangeListener<? super ObservableList<E>> listener)

    Description copied from interface: ObservableValue
    Removes the given listener from the list of listeners, that are notified whenever the value of the ObservableValue changes.

    If the given listener has not been previously registered (i.e. it was never added) then this method call is a no-op. If it had been previously added then it will be removed. If it had been added more than once, then only the first occurrence will be removed.

    Parameters:

    listener - The listener to remove

    See Also:

    ObservableValue.addListener(ChangeListener)

  • addListener

    public void addListener(ListChangeListener<? super E> listener)

    Description copied from interface: ObservableList
    Add a listener to this observable list.

    Parameters:

    listener - the listener for listening to the list changes

  • removeListener

    public void removeListener(ListChangeListener<? super E> listener)

    Description copied from interface: ObservableList
    Tries to removed a listener from this observable list. If the listener is not attached to this list, nothing happens.

    Parameters:

    listener - a listener to remove

  • fireValueChangedEvent

    protected void fireValueChangedEvent()

    Sends notifications to all attached InvalidationListeners, ChangeListeners, and ListChangeListener. This method is called when the value is changed, either manually by calling set(ObservableList) or in case of a bound property, if the binding becomes invalid.

  • fireValueChangedEvent

    protected void fireValueChangedEvent(ListChangeListener.Change<? extends E> change)

    Sends notifications to all attached InvalidationListeners, ChangeListeners, and ListChangeListener. This method is called when the content of the list changes.

    Parameters:

    change - the change that needs to be propagated

  • invalidated

    protected void invalidated()

    The method invalidated() can be overridden to receive invalidation notifications. This is the preferred option in Objects defining the property, because it requires less memory. The default implementation is empty.

  • get

    public ObservableList<E> get()

    Description copied from interface: WritableObjectValue
    Get the wrapped value. This must be identical to the value returned from WritableValue.getValue().

    This method exists only to align WritableObjectValue API with WritableBooleanValue and subclasses of WritableNumberValue

    Returns:

    The current value

  • set

    public void set(ObservableList<E> newValue)

    Description copied from interface: WritableObjectValue
    Set the wrapped value. Should be equivalent to WritableValue.setValue(java.lang.Object)

    Parameters:

    newValue - The new value

    See Also:

    WritableObjectValue.get()

  • isBound

    public boolean isBound()

    Description copied from interface: Property
    Can be used to check, if a Property is bound.

    Returns:

    true if the Property is bound, false otherwise

    See Also:

    Property.bind(javafx.beans.value.ObservableValue)

  • bind

    public void bind(ObservableValue<? extends ObservableList<E>> newObservable)

    Description copied from interface: Property
    Create a unidirection binding for this Property.

    Note that JavaFX has all the bind calls implemented through weak listeners. This means the bound property can be garbage collected and stopped from being updated.

    Parameters:

    newObservable - The observable this Property should be bound to.

  • unbind

    public void unbind()

    Description copied from interface: Property
    Remove the unidirectional binding for this Property. If the Property is not bound, calling this method has no effect.

    See Also:

    Property.bind(javafx.beans.value.ObservableValue)

  • toString

    public String toString()

    Returns a string representation of this ListPropertyBase object.

    Overrides:

    toString in class ListProperty<E>

    Returns:

    a string representation of this ListPropertyBase object.