Spec-Zone.ru › Tokio

Struct ReadBuf 

pub struct ReadBuf<'a> { /* private fields */ }

A wrapper around a byte buffer that is incrementally filled and initialized.

This type is a sort of “double cursor”. It tracks three regions in the buffer: a region at the beginning of the buffer that has been logically filled with data, a region that has been initialized at some point but not yet logically filled, and a region at the end that may be uninitialized. The filled region is guaranteed to be a subset of the initialized region.

In summary, the contents of the buffer can be visualized as:

[             capacity              ]
[ filled |         unfilled         ]
[    initialized    | uninitialized ]

It is undefined behavior to de-initialize any bytes from the uninitialized region, since it is merely unknown whether this region is uninitialized or not, and if part of it turns out to be initialized, it must stay initialized.

Implementations

impl<'a> ReadBuf<'a>

pub fn new(buf: &'a mut [u8]) -> ReadBuf<'a>

Creates a new ReadBuf from a fully initialized buffer.

pub fn uninit(buf: &'a mut [MaybeUninit<u8>]) -> ReadBuf<'a>

Creates a new ReadBuf from a buffer that may be uninitialized.

The internal cursor will mark the entire buffer as uninitialized. If the buffer is known to be partially initialized, then use assume_init to move the internal cursor.

pub fn capacity(&self) -> usize

Returns the total capacity of the buffer.

pub fn filled(&self) -> &[u8] ⓘ

Returns a shared reference to the filled portion of the buffer.

pub fn filled_mut(&mut self) -> &mut [u8] ⓘ

Returns a mutable reference to the filled portion of the buffer.

pub fn take(&mut self, n: usize) -> ReadBuf<'_>

Returns a new ReadBuf comprised of the unfilled section up to n.

pub fn initialized(&self) -> &[u8] ⓘ

Returns a shared reference to the initialized portion of the buffer.

This includes the filled portion.

pub fn initialized_mut(&mut self) -> &mut [u8] ⓘ

Returns a mutable reference to the initialized portion of the buffer.

This includes the filled portion.

pub unsafe fn inner_mut(&mut self) -> &mut [MaybeUninit<u8>]

Returns a mutable reference to the entire buffer, without ensuring that it has been fully initialized.

The elements between 0 and self.filled().len() are filled, and those between 0 and self.initialized().len() are initialized (and so can be converted to a &mut [u8]).

The caller of this method must ensure that these invariants are upheld. For example, if the caller initializes some of the uninitialized section of the buffer, it must call assume_init with the number of bytes initialized.

Safety

The caller must not de-initialize portions of the buffer that have already been initialized. This includes any bytes in the region marked as uninitialized by ReadBuf.

pub unsafe fn unfilled_mut(&mut self) -> &mut [MaybeUninit<u8>]

Returns a mutable reference to the unfilled part of the buffer without ensuring that it has been fully initialized.

Safety

The caller must not de-initialize portions of the buffer that have already been initialized. This includes any bytes in the region marked as uninitialized by ReadBuf.

pub fn initialize_unfilled(&mut self) -> &mut [u8] ⓘ

Returns a mutable reference to the unfilled part of the buffer, ensuring it is fully initialized.

Since ReadBuf tracks the region of the buffer that has been initialized, this is effectively “free” after the first use.

pub fn initialize_unfilled_to(&mut self, n: usize) -> &mut [u8] ⓘ

Returns a mutable reference to the first n bytes of the unfilled part of the buffer, ensuring it is fully initialized.

Panics

Panics if self.remaining() is less than n.

pub fn remaining(&self) -> usize

Returns the number of bytes at the end of the slice that have not yet been filled.

pub fn clear(&mut self)

Clears the buffer, resetting the filled region to empty.

The number of initialized bytes is not changed, and the contents of the buffer are not modified.

pub fn advance(&mut self, n: usize)

Advances the size of the filled region of the buffer.

The number of initialized bytes is not changed.

Panics

Panics if the filled region of the buffer would become larger than the initialized region.

pub fn set_filled(&mut self, n: usize)

Sets the size of the filled region of the buffer.

The number of initialized bytes is not changed.

Note that this can be used to shrink the filled region of the buffer in addition to growing it (for example, by a AsyncRead implementation that compresses data in-place).

Panics

Panics if the filled region of the buffer would become larger than the initialized region.

pub unsafe fn assume_init(&mut self, n: usize)

Asserts that the first n unfilled bytes of the buffer are initialized.

ReadBuf assumes that bytes are never de-initialized, so this method does nothing when called with fewer bytes than are already known to be initialized.

Safety

The caller must ensure that n unfilled bytes of the buffer have already been initialized.

pub fn put_slice(&mut self, buf: &[u8])

Appends data to the buffer, advancing the written position and possibly also the initialized position.

Panics

Panics if self.remaining() is less than buf.len().

Trait Implementations

impl<'a> BufMut for ReadBuf<'a>

Available on crate feature io-util only.

fn remaining_mut(&self) -> usize

Returns the number of bytes that can be written from the current position until the end of the buffer is reached. Read more

unsafe fn advance_mut(&mut self, cnt: usize)

Advance the internal cursor of the BufMut Read more

fn chunk_mut(&mut self) -> &mut UninitSlice

Returns a mutable slice starting at the current BufMut position and of length between 0 and BufMut::remaining_mut(). Note that this can be shorter than the whole remainder of the buffer (this allows non-continuous implementation). Read more

fn has_remaining_mut(&self) -> bool

Returns true if there is space in self for more bytes. Read more

fn put<T>(&mut self, src: T)
where T: Buf, Self: Sized,

Transfer bytes into self from src and advance the cursor by the number of bytes written. Read more

fn put_slice(&mut self, src: &[u8])

Transfer bytes into self from src and advance the cursor by the number of bytes written. Read more

fn put_bytes(&mut self, val: u8, cnt: usize)

Put cnt bytes val into self. Read more

fn put_u8(&mut self, n: u8)

Writes an unsigned 8 bit integer to self. Read more

fn put_i8(&mut self, n: i8)

Writes a signed 8 bit integer to self. Read more

fn put_u16(&mut self, n: u16)

Writes an unsigned 16 bit integer to self in big-endian byte order. Read more

fn put_u16_le(&mut self, n: u16)

Writes an unsigned 16 bit integer to self in little-endian byte order. Read more

fn put_u16_ne(&mut self, n: u16)

Writes an unsigned 16 bit integer to self in native-endian byte order. Read more

fn put_i16(&mut self, n: i16)

Writes a signed 16 bit integer to self in big-endian byte order. Read more

fn put_i16_le(&mut self, n: i16)

Writes a signed 16 bit integer to self in little-endian byte order. Read more

fn put_i16_ne(&mut self, n: i16)

Writes a signed 16 bit integer to self in native-endian byte order. Read more

fn put_u32(&mut self, n: u32)

Writes an unsigned 32 bit integer to self in big-endian byte order. Read more

fn put_u32_le(&mut self, n: u32)

Writes an unsigned 32 bit integer to self in little-endian byte order. Read more

fn put_u32_ne(&mut self, n: u32)

Writes an unsigned 32 bit integer to self in native-endian byte order. Read more

fn put_i32(&mut self, n: i32)

Writes a signed 32 bit integer to self in big-endian byte order. Read more

fn put_i32_le(&mut self, n: i32)

Writes a signed 32 bit integer to self in little-endian byte order. Read more

fn put_i32_ne(&mut self, n: i32)

Writes a signed 32 bit integer to self in native-endian byte order. Read more

fn put_u64(&mut self, n: u64)

Writes an unsigned 64 bit integer to self in the big-endian byte order. Read more

fn put_u64_le(&mut self, n: u64)

Writes an unsigned 64 bit integer to self in little-endian byte order. Read more

fn put_u64_ne(&mut self, n: u64)

Writes an unsigned 64 bit integer to self in native-endian byte order. Read more

fn put_i64(&mut self, n: i64)

Writes a signed 64 bit integer to self in the big-endian byte order. Read more

fn put_i64_le(&mut self, n: i64)

Writes a signed 64 bit integer to self in little-endian byte order. Read more

fn put_i64_ne(&mut self, n: i64)

Writes a signed 64 bit integer to self in native-endian byte order. Read more

fn put_u128(&mut self, n: u128)

Writes an unsigned 128 bit integer to self in the big-endian byte order. Read more

fn put_u128_le(&mut self, n: u128)

Writes an unsigned 128 bit integer to self in little-endian byte order. Read more

fn put_u128_ne(&mut self, n: u128)

Writes an unsigned 128 bit integer to self in native-endian byte order. Read more

fn put_i128(&mut self, n: i128)

Writes a signed 128 bit integer to self in the big-endian byte order. Read more

fn put_i128_le(&mut self, n: i128)

Writes a signed 128 bit integer to self in little-endian byte order. Read more

fn put_i128_ne(&mut self, n: i128)

Writes a signed 128 bit integer to self in native-endian byte order. Read more

fn put_uint(&mut self, n: u64, nbytes: usize)

Writes an unsigned n-byte integer to self in big-endian byte order. Read more

fn put_uint_le(&mut self, n: u64, nbytes: usize)

Writes an unsigned n-byte integer to self in the little-endian byte order. Read more

fn put_uint_ne(&mut self, n: u64, nbytes: usize)

Writes an unsigned n-byte integer to self in the native-endian byte order. Read more

fn put_int(&mut self, n: i64, nbytes: usize)

Writes low nbytes of a signed integer to self in big-endian byte order. Read more

fn put_int_le(&mut self, n: i64, nbytes: usize)

Writes low nbytes of a signed integer to self in little-endian byte order. Read more

fn put_int_ne(&mut self, n: i64, nbytes: usize)

Writes low nbytes of a signed integer to self in native-endian byte order. Read more

fn put_f32(&mut self, n: f32)

Writes an IEEE754 single-precision (4 bytes) floating point number to self in big-endian byte order. Read more

fn put_f32_le(&mut self, n: f32)

Writes an IEEE754 single-precision (4 bytes) floating point number to self in little-endian byte order. Read more

fn put_f32_ne(&mut self, n: f32)

Writes an IEEE754 single-precision (4 bytes) floating point number to self in native-endian byte order. Read more

fn put_f64(&mut self, n: f64)

Writes an IEEE754 double-precision (8 bytes) floating point number to self in big-endian byte order. Read more

fn put_f64_le(&mut self, n: f64)

Writes an IEEE754 double-precision (8 bytes) floating point number to self in little-endian byte order. Read more

fn put_f64_ne(&mut self, n: f64)

Writes an IEEE754 double-precision (8 bytes) floating point number to self in native-endian byte order. Read more

fn limit(self, limit: usize) -> Limit<Self>
where Self: Sized,

Creates an adaptor which can write at most limit bytes to self. Read more

fn writer(self) -> Writer<Self>
where Self: Sized,

Available on crate feature std only.
Creates an adaptor which implements the Write trait for self. Read more

fn chain_mut<U>(self, next: U) -> Chain<Self, U>
where U: BufMut, Self: Sized,

Creates an adapter which will chain this buffer with another. Read more

impl Debug for ReadBuf<'_>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations

impl<'a> !UnwindSafe for ReadBuf<'a>

impl<'a> Freeze for ReadBuf<'a>

impl<'a> RefUnwindSafe for ReadBuf<'a>

impl<'a> Send for ReadBuf<'a>

impl<'a> Sync for ReadBuf<'a>

impl<'a> Unpin for ReadBuf<'a>

impl<'a> UnsafeUnpin for ReadBuf<'a>

Blanket Implementations

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

MIT License
Copyright © Tokio Contributors
https://docs.rs/tokio/1.53.1/tokio/io/struct.ReadBuf.html

Spec-Zone.ru

Настройки Оффлайн Что нового Помощь О нас
Spec-Zone .ru
спецификации, руководства, описания, API