Spec-Zone.ru › Tokio

Struct OwnedReadHalf 

pub struct OwnedReadHalf { /* private fields */ }
Available on Unix and crate feature net only.

Owned read half of a UnixStream, created by into_split.

Reading from an OwnedReadHalf is usually done using the convenience methods found on the AsyncReadExt trait.

Implementations

impl OwnedReadHalf

pub fn reunite(self, other: OwnedWriteHalf) -> Result<UnixStream, ReuniteError>

Attempts to put the two halves of a UnixStream back together and recover the original socket. Succeeds only if the two halves originated from the same call to into_split.

pub async fn ready(&self, interest: Interest) -> Result<Ready>

Waits for any of the requested ready states.

This function is usually paired with try_read(). It can be used instead of readable() to check the returned ready set for Ready::READABLE and Ready::READ_CLOSED events.

The function may complete without the socket being ready. This is a false-positive and attempting an operation will return with io::ErrorKind::WouldBlock. The function can also return with an empty Ready set, so you should always check the returned value and possibly wait again if the requested states are not set.

This function is equivalent to UnixStream::ready.

Cancel safety

This method is cancel safe. Once a readiness event occurs, the method will continue to return immediately until the readiness event is consumed by an attempt to read or write that fails with WouldBlock or Poll::Pending.

pub async fn readable(&self) -> Result<()>

Waits for the socket to become readable.

This function is equivalent to ready(Interest::READABLE) and is usually paired with try_read().

Cancel safety

This method is cancel safe. Once a readiness event occurs, the method will continue to return immediately until the readiness event is consumed by an attempt to read that fails with WouldBlock or Poll::Pending.

pub fn try_read(&self, buf: &mut [u8]) -> Result<usize>

Tries to read data from the stream into the provided buffer, returning how many bytes were read.

Receives any pending data from the socket but does not wait for new data to arrive. On success, returns the number of bytes read. Because try_read() is non-blocking, the buffer does not have to be stored by the async task and can exist entirely on the stack.

Usually, readable() or ready() is used with this function.

Return

If data is successfully read, Ok(n) is returned, where n is the number of bytes read. If n is 0, then it can indicate one of two scenarios:

  1. The stream’s read half is closed and will no longer yield data.
  2. The specified buffer was 0 bytes in length.

If the stream is not ready to read data, Err(io::ErrorKind::WouldBlock) is returned.

pub fn try_read_buf<B: BufMut>(&self, buf: &mut B) -> Result<usize>

Available on crate feature io-util only.

Tries to read data from the stream into the provided buffer, advancing the buffer’s internal cursor, returning how many bytes were read.

Receives any pending data from the socket but does not wait for new data to arrive. On success, returns the number of bytes read. Because try_read_buf() is non-blocking, the buffer does not have to be stored by the async task and can exist entirely on the stack.

Usually, readable() or ready() is used with this function.

Return

If data is successfully read, Ok(n) is returned, where n is the number of bytes read. Ok(0) indicates the stream’s read half is closed and will no longer yield data. If the stream is not ready to read data Err(io::ErrorKind::WouldBlock) is returned.

pub fn try_read_vectored(&self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>

Tries to read data from the stream into the provided buffers, returning how many bytes were read.

Data is copied to fill each buffer in order, with the final buffer written to possibly being only partially filled. This method behaves equivalently to a single call to try_read() with concatenated buffers.

Receives any pending data from the socket but does not wait for new data to arrive. On success, returns the number of bytes read. Because try_read_vectored() is non-blocking, the buffer does not have to be stored by the async task and can exist entirely on the stack.

Usually, readable() or ready() is used with this function.

Return

If data is successfully read, Ok(n) is returned, where n is the number of bytes read. Ok(0) indicates the stream’s read half is closed and will no longer yield data. If the stream is not ready to read data Err(io::ErrorKind::WouldBlock) is returned.

pub fn peer_addr(&self) -> Result<SocketAddr>

Returns the socket address of the remote half of this connection.

pub fn local_addr(&self) -> Result<SocketAddr>

Returns the socket address of the local half of this connection.

Trait Implementations

impl AsRef<UnixStream> for OwnedReadHalf

fn as_ref(&self) -> &UnixStream

Converts this type into a shared reference of the (usually inferred) input type.

impl AsyncRead for OwnedReadHalf

fn poll_read( self: Pin<&mut Self>, cx: &mut Context<'_>, buf: &mut ReadBuf<'_>, ) -> Poll<Result<()>>

Attempts to read from the AsyncRead into buf. Read more

impl Debug for OwnedReadHalf

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations

impl Freeze for OwnedReadHalf

impl RefUnwindSafe for OwnedReadHalf

impl Send for OwnedReadHalf

impl Sync for OwnedReadHalf

impl Unpin for OwnedReadHalf

impl UnsafeUnpin for OwnedReadHalf

impl UnwindSafe for OwnedReadHalf

Blanket Implementations

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<R> AsyncReadExt for R
where R: AsyncRead + ?Sized,

fn chain<R>(self, next: R) -> Chain<Self, R>
where Self: Sized, R: AsyncRead,

Available on crate feature io-util only.
Creates a new AsyncRead instance that chains this stream with next. Read more

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> Read<'a, Self>
where Self: Unpin,

Available on crate feature io-util only.
Pulls some bytes from this source into the specified buffer, returning how many bytes were read. Read more

fn read_buf<'a, B>(&'a mut self, buf: &'a mut B) -> ReadBuf<'a, Self, B>
where Self: Unpin, B: BufMut + ?Sized,

Available on crate feature io-util only.
Pulls some bytes from this source into the specified buffer, advancing the buffer’s internal cursor. Read more

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExact<'a, Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads the exact number of bytes required to fill buf. Read more

fn read_u8(&mut self) -> ReadU8<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 8 bit integer from the underlying reader. Read more

fn read_i8(&mut self) -> ReadI8<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads a signed 8 bit integer from the underlying reader. Read more

fn read_u16(&mut self) -> ReadU16<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 16-bit integer in big-endian order from the underlying reader. Read more

fn read_i16(&mut self) -> ReadI16<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads a signed 16-bit integer in big-endian order from the underlying reader. Read more

fn read_u32(&mut self) -> ReadU32<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 32-bit integer in big-endian order from the underlying reader. Read more

fn read_i32(&mut self) -> ReadI32<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads a signed 32-bit integer in big-endian order from the underlying reader. Read more

fn read_u64(&mut self) -> ReadU64<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 64-bit integer in big-endian order from the underlying reader. Read more

fn read_i64(&mut self) -> ReadI64<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an signed 64-bit integer in big-endian order from the underlying reader. Read more

fn read_u128(&mut self) -> ReadU128<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 128-bit integer in big-endian order from the underlying reader. Read more

fn read_i128(&mut self) -> ReadI128<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an signed 128-bit integer in big-endian order from the underlying reader. Read more

fn read_f32(&mut self) -> ReadF32<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an 32-bit floating point type in big-endian order from the underlying reader. Read more

fn read_f64(&mut self) -> ReadF64<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an 64-bit floating point type in big-endian order from the underlying reader. Read more

fn read_u16_le(&mut self) -> ReadU16Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 16-bit integer in little-endian order from the underlying reader. Read more

fn read_i16_le(&mut self) -> ReadI16Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads a signed 16-bit integer in little-endian order from the underlying reader. Read more

fn read_u32_le(&mut self) -> ReadU32Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 32-bit integer in little-endian order from the underlying reader. Read more

fn read_i32_le(&mut self) -> ReadI32Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads a signed 32-bit integer in little-endian order from the underlying reader. Read more

fn read_u64_le(&mut self) -> ReadU64Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 64-bit integer in little-endian order from the underlying reader. Read more

fn read_i64_le(&mut self) -> ReadI64Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an signed 64-bit integer in little-endian order from the underlying reader. Read more

fn read_u128_le(&mut self) -> ReadU128Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an unsigned 128-bit integer in little-endian order from the underlying reader. Read more

fn read_i128_le(&mut self) -> ReadI128Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an signed 128-bit integer in little-endian order from the underlying reader. Read more

fn read_f32_le(&mut self) -> ReadF32Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an 32-bit floating point type in little-endian order from the underlying reader. Read more

fn read_f64_le(&mut self) -> ReadF64Le<&mut Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads an 64-bit floating point type in little-endian order from the underlying reader. Read more

fn read_to_end<'a>(&'a mut self, buf: &'a mut Vec<u8>) -> ReadToEnd<'a, Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads all bytes until EOF in this source, placing them into buf. Read more

fn read_to_string<'a>( &'a mut self, dst: &'a mut String, ) -> ReadToString<'a, Self>
where Self: Unpin,

Available on crate feature io-util only.
Reads all bytes until EOF in this source, appending them to buf. Read more

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Available on crate feature io-util only.
Creates an adaptor which reads at most limit bytes from it. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

MIT License
Copyright © Tokio Contributors
https://docs.rs/tokio/1.53.1/tokio/net/unix/struct.OwnedReadHalf.html

Spec-Zone.ru

Настройки Оффлайн Что нового Помощь О нас
Spec-Zone .ru
спецификации, руководства, описания, API